Hi Robert, unfortunally they don't ship directly to Italy !
Forum: rodboard

Hi all, I'm looking for old GS1022X or new GP1022X Lamiglas blanks. Does anyone have one for sale? Since a couple of years it has become impossible to purchase Lamiglas blanks from Italy. Lamiglas company does not ship to Italy, they have no resellers in Europe and MudHoleno longer sale Lamiglas blanks! Please help me.
Forum: rodboard

Ok Tom Thank you. You don't ship the book in Europe (Italy), right?
Forum: rodboard

Tom Kirkman Wrote: ------------------------------------------------------- > For those that asked, the leftover copies of the > new fishing rod ergonomics book has been added to > the magazine website - > > od-ergonomics-by-tom-kirkman/ > > ........ Hi Tom, do you have an electronics copy (pdf) to buy of it?
Forum: rodboard

Hello, does anyone know the measures of TIP and BUT section for this Lamiglas blank?
Forum: rodboard

Thanks Kendall.
Forum: rodboard

Thanks Spencer.
Forum: rodboard

Hi all, can anyone tell me which components Lamiglas used to assemble the Black Salt spinning rods? Specifically I am referring to the BS725S rod model, I would need to know the brand and model of rings and reel seat.
Forum: rodboard

Yes Michael, you assuming well ! OK, I'll start to study.
Forum: rodboard

Thanks Tom, could you please provide me some contact/link where I can get instructions to do this? I'm sorry but I'm a beginner with the practice of thrad art.
Forum: rodboard

Mark Talmo Wrote: ------------------------------------------------------- > Marco, > You are asking for quite a bit! I certainly do not > have any suggestions, but Maybe Rich Forhan has > some “Magic Wand” recommendations. Thank you Mark.
Forum: rodboard

Hi all, I'm building a spinning rod using the Lamiglas Texalium tube as a handle. I'd like to make a simple thread artwork (about 10 cm over the foregrip) to follow the pattern of the texalium tube (twill woven). Can anyone help me by suggesting a simple scheme (2 colors) to follow or where can I find appropriate information on the net?
Forum: rodboard

Capt Neil Faulkner Wrote: ------------------------------------------------------- > Hi Skip, > > I do everything within my power not to use > CS/CP!!! Just me as I know other builders use > CS/CP all the time. I use metallic thread as > often as possible which means 99% of the time. > > When I have to use white nylon or pearl metallic > over a black blank
Forum: rodboard

Thanks to all for your support, I'll try yours suggestments.
Forum: rodboard

Thanks to all for your support, I'll try yours suggestments.
Forum: rodboard

Hello, I bought a NFC blank (SWB807IM) and checking it for the spine, I noticed that it is not perfectly straight. For about 1 feet, from the TIP, it bends to the left with respect to its spine (I don't know how much, compared to the tip line maybe 1/2 inch). What can I do? Is it possible to straighten it? I've read that some builders straighten crooked blanks using heat. What could be the co
Forum: rodboard

Thanks Michael, if I understand correctly two coats of undiluted CP should solve the problem, OK! I also take this opportunity to ask you if too high a thread tension, could have contributed to the problem exposed.
Forum: rodboard

Hello, I'm writing you to have support support for a problem related to stained wraps, using a clear nylon thread of size A (Power Wrap, Neon Pink color #361,CP). I made the wraps on the various guides, taking care to tighten them very well, and then proceeded with 3 coats of CP (Chromaseal). After having given the first coat of epoxy (TM LIGHT), I have verified the work and it is very bad
Forum: rodboard

Thanks Spencer, I'll contact Todd . Ciao Marco
Forum: rodboard

Marco Cellini Wrote: ------------------------------------------------------- > Thank you Spencer, but the American Tackle blank's > suggested has a weight range too wide for my > scope. > > Ciao > Marco sorry richard for getting your name wrong in the answer. Marco
Forum: rodboard

Thank you Spencer, but the American Tackle blank's suggested has a weight range too wide for my scope. Ciao Marco
Forum: rodboard

I'm very sad! Thanks a lot Kendall. Ciao Marco
Forum: rodboard

Hello to all, I ask you if any of you know these two blanks: Lamiglas GP1022H MHX SA-1025 I know the Lamiglas one very well, analyzing the data they seem very similar. I'm looking for a more powerful blank than the GP1022H but not as powerful as the Lamiglas GP1022X, a cross between the two. From my practical experience I found the MHX blanks to be more powerful than stated, for this reaso
Forum: rodboard

I'm an Italian rodbuilder, since 1999 I used a lot of Lamiglas blank's to realize my works ( G1000 Salmon & Steelhead series), I thinks to be the best blanks ! Always I bought it by wholesale Mud Hole program and now there are unsearchable (I think they have lose the reseller agreement with them). I wrote to MH and they have their mouths sewn up, no one gives details and postponing the pu
Forum: rodboard

Tom Kirkman Wrote: ------------------------------------------------------- > You affect both when you trim a blank. There is a > good article in the new RodMaker that details what > happens when you trim from tip, butt or both. An > illustration is used to depict each scenario. > > In any case, trimming always results in a slower > action. Speed is generally increase
Forum: rodboard

Tom Kirkman Wrote: ------------------------------------------------------- > You affect both when you trim a blank. There is a > good article in the new RodMaker that details what > happens when you trim from tip, butt or both. An > illustration is used to depict each scenario. > > In any case, trimming always results in a slower > action. Speed is generally increase
Forum: rodboard

Hi guys, Yesterday I received my order from MH, unfortunately the blank Lamiglas PRO 965 arrived broken! I opened un issue with MH to start any refund from FEDEX, but NOW on their web site the blank is no more available !!! I am in tremendous situation with my client, please does anyone could help me to find this blank?
Forum: rodboard

Hi Tom sorry for the delay with which I answer. I understand your motivations unfortunately I think I will have to abandon the idea of completing my collection of your wonderful magazine. The retailer to whom I refer is obviously Joaquim Louriero of Cork4Us, just yesterday at the time of my renewal request he told me that he is considering whether or not to follow as he has too few subscripti
Forum: rodboard

Hi guys, I have all the magazines starting from the number one. Unfortunately I do not know how I lost the # 18-6. Some of you may have a copy to buy? I ask you why Tom does not carry out International shipments and the European retailers, where I normally buy my magazines, can not get it. Regards
Forum: rodboard

Thanks Matthew, but I'II build a two piece rod! The rofgeeks blanks that you have indicated are mono.
Forum: rodboard