SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 23 of 23
3 years ago
Ed Holloway
1. Feathers
For those of you that do/have done feather inlays, where is a good place to get the feathers??? I've looked all over online and can't really find what I'm looking for.
Thanks in Advance!!
Forum: rodboard 3 years ago
Ed Holloway
2. NFC Sale!
NFC is having a great sale on a selection of their blanks and CF handles. X-Ray blanks at $75!!!
Forum: rodboard 3 years ago
Ed Holloway
Spencer Phipps Wrote:
-------------------------------------------------------
> NFC rear grips are considerably shorter.
I have also been using the NFC grips since they came out you are correct they are shorter---BUT problem is now I was told they no longer have the 3K. I made an order last week and was actually called to tell me this. The person that called was a female, her words were the
Forum: rodboard 3 years ago
Ed Holloway
What specific parts will be included with the kits (i.e. winding checks, butt cap, double tenon trim ring??)
Forum: rodboard 3 years ago
Ed Holloway
I've built several rods for customers and a couple for myself with the CCT Aero and Blade seats. I and my customers really like them. They are as advertised, they make for a more aesthetic, lightweight, more sensitive build!! Waiting patiently for the new HCC seats to come out!!
Forum: rodboard 3 years ago
Ed Holloway
I've been seeing this new Tsuka handle system from AT online for a while now but I can't find anyone who is carrying it as of yet. From what I've read the actual handle and CF hoods are the G2s which have been out and I have been using for a while now. The only thing I can see that is actually new is the CF HSS reel seat. Someone in another post had mentioned he has used the reel seats and liked
Forum: rodboard 5 years ago
Ed Holloway
I have several Lew's rods simply because I love the action of each and every one I bought BUT I absolutely hate the hook keeper holes in bottom of the trigger. It puts the bait/hook down lower on the blank but also puts it on the bottom of the rod which causes them not to lay flat on the deck of my boat. So, they all now have a dropshot style hook keeper up top and in front of the reel seat. I li
Forum: rodboard 5 years ago
Ed Holloway
I'm planning another build for myself and want to put a Tiger Wrap above the fore-grip. My question pertains to color. My trim parts are red and plan to use the red Fusion Variegated thread on the guides. I want to stay with the Reddish/Whiteish tone of the variegated thread so what colors should I use (upper and lower) for the tiger??
Thanks In Advance!
Forum: rodboard 6 years ago
Ed Holloway
David Baylor Wrote:
-------------------------------------------------------
> I realize the problem is solved, but a little
> different take on the suggestion that Roger
> supplied about wrapping a drill bit with sand
> paper ..... I took a piece of 1/4" steel dowel rod
> and cut a 1" deep slot in the end. Cut a piece of
> 1" wide plumbers emery cloth a fe
Forum: rodboard 6 years ago
Ed Holloway
Michael Danek Wrote:
-------------------------------------------------------
> What I would do would be to order the right part
> and save the one you have for a later build.
> There is always another build around the corner.
That was a thought Michael but I tried an earlier stated technique and it worked like a champ---I'm all set now. Thanks for all the advice everyone!!
Forum: rodboard 6 years ago
Ed Holloway
Didn't know you could get a rat tail fill that's at or over 1/2 inch in diameter???
Forum: rodboard 6 years ago
Ed Holloway
John Cates Wrote:
-------------------------------------------------------
> Can you ream it out?
John that is my question. The insert is pretty hard--What could I use to ream it out, or can I?
Forum: rodboard 6 years ago
Ed Holloway
Got my Mudhole order yesterday and discovered Mudholes Blank Diameter Chart is incorrect, at least is is for the blank I got. I ordered an American Tackle exposed blank reel seat that comes with an insert. According to the chart the ID of the insert should go down to where I wanted it but the blank was actually about .5 mm plus larger than the chart says. Did not discover this until after I expox
Forum: rodboard 6 years ago
Ed Holloway
I'm just getting started and have no idea how to price my work. I've only built for myself practicing techniques but have just received a request for 2 rods----Can someone shed some light on how to price a custom rod please!!
Thanks in Advance!!
Forum: rodboard 6 years ago
Ed Holloway
How will the rubber ones be with finish over them? I ask because I've already made the order.
Forum: rodboard 6 years ago
Ed Holloway
I am a rookie building my first rod so bare with me-----I have a very slim blank I'm working with and need to know what size winding checks to order. I plan on using the black rubber WCs from Mudhole which come in a variety of sizes but nothing really close to the diameter of my blank. Because I do not have my reel seat and handle I can't give an exact measurement of where the winding checks will
Forum: rodboard 6 years ago
Ed Holloway
20. Re: Shipping
Randy Weakley Wrote:
-------------------------------------------------------
> Hello,
>
> I need to ship a rod to Italy for someone in the
> Navy stationed out there. I got a 3 inch ABS
> pipe, but it is just barely too small, and rubs on
> the finish as I try to slide it in. What other
> methods do you guys use to ship rods? This is a
> spinning rod with a si
Forum: rodboard 6 years ago
Ed Holloway
I got the cork removed and found "loads" of epoxy underneath (Hood nut cracked had to replace it all). Will Citristrip remove the epoxy as well as the flaking finish??
Forum: rodboard 6 years ago
Ed Holloway
You mention using a chemical to remove the old finish. Which is better chemical or sanding?? In any case I will prolly remove the guides and completely rebuild the rod to make it look good cosmetically.
Forum: rodboard 6 years ago
Ed Holloway
First off let me thank you all in advance for sharing your experiences and patience with me. I'm about to take my second retirement and wanted to try rod building to occupy my spare time.
Now for my "Rookie Question": I have an older Allstar rod that the clear coating is coming off all up and down the rod. Some places it's just flaking off. Really weird cause I have another identical
Forum: rodboard
Current Page: 1 of 1
|