SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 7 of 7
6 years ago
Bill Theobald
Marco Cellini Wrote:
-------------------------------------------------------
> Thanks Matthew, but I'II build a two piece rod!
> The rofgeeks blanks that you have indicated are
> mono.
If you're referring to the type of line, Braid may be used even though they only list test weights for mono. If you have any questions e-mail Rod Geeks, I find they are very responsive.
Bill
Forum: rodboard 6 years ago
Bill Theobald
Thanks for the feedback. All of my surf rods will be spinning and not casting.
Good idea with the emory cloth over a dowel.
Forum: rodboard 6 years ago
Bill Theobald
3. Underwraps
Folks,
I recently built an 11' surf rod and did not use underwraps and a fellow building said I was brave for not using underwraps.
What are your thoughts on using underwraps for surf builds? I have more surf rods to build for my self and would like you opinions.
Will be using either Single Foot or Double foot guides on the rods. Probably doubles on the rod rate 2-5 oz and singles on t
Forum: rodboard 6 years ago
Bill Theobald
I recently built my first Surf Rod (second overall) so take this with a grain if salt. I used the Rod Geeks SRF110C3 which is MH MF & M M, comes with one butt section an two tips. I was using the MH/MF section with the following guides.
Fuji KWSG 30J, 20J, 12J & 8J(3). I used the rod at the Cape Cod Canal and it cast well and was able to handle fish up to 30#s in a strong current.
Forum: rodboard 7 years ago
Bill Theobald
Thanks for all of the guidance, truly appreciate it. I have built one rod before but in the grand scheme of things I'm a complete noobie. I have been visiting this forum (and others) absorbing information like a sponge. Admittedly, I do suffer from OCD like a few of you guys. I have read Tom's Book as well as Dale Clemmons.
I was only going to buy a few extras so I would have maybe 1 or 2
Forum: rodboard 7 years ago
Bill Theobald
Dennis Danku Wrote:
-------------------------------------------------------
> Bill, If you want to save some money, unhide your
> email.
Dennis & everyone,
Thanks for the tips.
Bill
Forum: rodboard 7 years ago
Bill Theobald
I'm new to rod building and want to build a few surf rods. I'm fairly certain I want to use Fuji KW & KL & KTs. I was wondering if you folks buys the guides as you need them for a specific rod or buy a bunch to have on hand for future builds. I will only be building rods for myself so I don't want to amass a huge supply / inventory of guides.
Does it make sense to buy extra guides
Forum: rodboard
Current Page: 1 of 1
|