SPONSORS
2024 ICRBE EXPO |
Current Page: 1 of 1
Results 1 - 4 of 4
7 years ago
Chris Ritchie
It seems like the sauna did the trick. Thanks for all the input.
Forum: rodboard 7 years ago
Chris Ritchie
Michael Danek Wrote:
-------------------------------------------------------
> Is it possible that the Permagloss is attacking
> the previous finish on the rod? And the
> combination of the Permagloss and the damaged
> finish is remaining tacky?
I suppose anything is possible.
I've got it in the bathroom with a tub full of HOT water.
Forum: rodboard 7 years ago
Chris Ritchie
Norman Miller Wrote:
-------------------------------------------------------
> What's the relative humidity where you live, zero?
> Never heard of Permagloss not setting up within
> 20-30 min. You either have a bad batch or it has
> been contaminated with something. Maybe the finish
> on the old blank is causing the contamination.
> Norm
I live in Houston. The humid
Forum: rodboard 7 years ago
Chris Ritchie
I have an older rod that needed the guides replaced. While removing the guides (first time) I damaged the finish. I ordered up some Perma Gloss and first applied it using a technique involving a hole cut into some neoprene and slid down the blank. That was messy and the finish was uneven. It ended up being really thin at the butt end, almost non-existent, and thick at the tip. I changed the
Forum: rodboard
Current Page: 1 of 1
|