SPONSORS
2024 ICRBE EXPO |
Results 1 - 30 of 66
6 years ago
Gerald S Brydalski
Just curious about water slide decals. Pros and cons. After applying and water dissapates, can epoxy be put directly over this decal? .Never used this style before. Thanks for the help
Forum: rodboard 6 years ago
Gerald S Brydalski
2. Re: Decal
Nuno: Thank you, just looked at them. How would I get a HULK decal since companies wont print do to copywrite. This will be my personal rod, and like the green/purple HULK to go with my green/purple wraps. Thanks
Forum: rodboard 6 years ago
Gerald S Brydalski
3. Re: Decal
Companies can not sell decals do to copywright infridements, so Im looking anywhere I can. I do not have capability to print these so if any one can help me out it would be greatly appreciated.
Forum: rodboard 6 years ago
Gerald S Brydalski
4. Re: Decal
Where are your pics located? Looking for a small two tone HULK, purple torn pants, green body decal. . Thanks for the help
Forum: rodboard 6 years ago
Gerald S Brydalski
5. Decal
Just looking for a decal of the HULK(Green) to put on my rod build, if it is possible. Thanks for the help in finding one
Forum: rodboard 6 years ago
Gerald S Brydalski
6. Re: 15" cts
This is my guide spacing from tip back: tip,4,9,15,22,31,41,51,63,76,90,106,123,142,. I start with a size 20, 16, 12 10,then the rest all 8 running guides. I DO NOT use a tip top guide just a 8 running guide
Forum: rodboard 7 years ago
Gerald S Brydalski
Interested in buying approx. 12 jungle cock nails for a feather inlay I will be doing on a build for myself. Really do not want to buy a full cape for this project. Any help will be appreciated
Forum: rodboard 7 years ago
Gerald S Brydalski
A customer says he saw a large mermaid decale, not like the small one from Mudhole and he would like it on his rod. I can not seem to find this one or the pole dancing girl decale either. Any help is appreciated. Thank you
Forum: rodboard 8 years ago
Gerald S Brydalski
10. Spey Conversion
Just curious, what is the real difference in a spey conversion turned into a float rod or a blank designed specifically to be a float rod?? Is it length, power, lightness?
Forum: rodboard 8 years ago
Gerald S Brydalski
I use Abalone quite a lot. Kevin Knox is the man with the knowledge. He will tell you how to. HEAT gun does not work well. Contact Kevin, he taught me his method
Forum: rodboard 8 years ago
Gerald S Brydalski
Any type of paint??water based or paint like testors. Will finish bother paint . thanks for all advice, first time with neon colors. sprayed or brushed?
Forum: rodboard 8 years ago
Gerald S Brydalski
I did burnish and wrap very titely. Used cp . been building long time but never used these colors before.
Forum: rodboard 8 years ago
Gerald S Brydalski
Tying for a customer using pro wrap flo green and flo orange a thread. No matter how tite I pack this thread, I see dark color behind thread. Should I have used a white base first or what is the solution??? thanks
Forum: rodboard 8 years ago
Gerald S Brydalski
I have done several EVA grips. Not hard , just takes planning and a good fine saw blade. I have used both a band saw and a miter saw. Just take your time and practice on scrap pieces. Send me an email and I can help you ouy
Forum: rodboard 9 years ago
Gerald S Brydalski
19. For Kevin Knox
Kevin: been trying to get onto your site to order some abalone but it says under construction. I heard you had some problems though with it ???
Forum: rodboard 9 years ago
Gerald S Brydalski
Have sent several text messages to the listed phone number and as usual ,NO replies back to me?????????
Forum: rodboard 9 years ago
Gerald S Brydalski
22. CTS rod blank
Looking to purchase a CTS 13' or 13'6" float rod blank (Affinity Series) in 3-6 or 4-8 lb rating. Really do not want to wait 9 months for the blank to arrive ,like I have in the past . Any info/help is appreciated.
Forum: rodboard 9 years ago
Gerald S Brydalski
Thanks to all, guess it was pilot error. I just hope it will harden eventually
Forum: rodboard 9 years ago
Gerald S Brydalski
Tom: its been over 30 hrs so far . I mixed the same way I have always, So you say to wait and see after 3 days? I will wait and see Thanks
Forum: rodboard 9 years ago
Gerald S Brydalski
I have been building rods for over 15 yrs,so im not new to this great hobby. Im building a rod for a customer and my epoxy is not hardening. Ive been using the same brand epoxy for all this time. My first coat was dry, my second coat was dry ,my third thin coat is almost dry but kinda tacky. I measure everything perfectly, as I have always done. I am dumb founded over this. Can I put a thin coat
Forum: rodboard 9 years ago
Gerald S Brydalski
26. Curious
Building a rod for a customer. He gave me some pac bay dark navy blue size A nylon thread. I have been building rods for 15 years. I packed this thread tite,put 2 coats of cp on it ,let it dry over 12 hrs. Now I put my first coat of finish on the thread and some spots appear a little darker than the rest of the thread. Is this bad thread??? Never used pac bay before always Gudebrod or pro wrap.W
Forum: rodboard 10 years ago
Gerald S Brydalski
27. Kevin Knox Site
Been trying to get on Kevins veneer site "Anglers Envy" but it is no longer coming up ????
Forum: rodboard 10 years ago
Gerald S Brydalski
A friend of mine just noticed a hairline crack in his wood reel seat. How can he prevent this crack from getting worse? Any ideas will be appreciated Thanks
Forum: rodboard 10 years ago
Gerald S Brydalski
29. Snake Skin
Besides Mud Hole where else can I get different types of snakeskin to use on a rod? Thanks
Forum: rodboard |