I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Blank not fitting ferrule
Posted by: Ed K (---.RCMD.splitrock.net)
Date: July 12, 2001 05:09PM

I just recieved a blank that is supposed to fit # 2 uni-butt, the problem is the blank has a dia. of .812 the ferrule is .875. I would apprciate any help you can give me.

Thanks
Ed

Options: ReplyQuote
Re: Blank not fitting ferrule
Posted by: William (---.proxy.aol.com)
Date: July 12, 2001 08:54PM

Blanks are not made to fit the ferrule. That's part of rod building. You have to build it up. In a past issue of RodMaker they showed using some fiberglass drywall tape to take up the space. I suppose you could do that or even use thread to make shims or bushings. I would think you'd want toalso use a heavier type adhesive like Rod Bond? Somebody?

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster