SPONSORS
2024 ICRBE EXPO |
Holding Thread Spool on Rod while turning
Posted by:
Sanford Hochman
(---.cape.com)
Date: January 06, 2002 10:14AM
Here's a neat tip: Rather than use tape to hold a spool on the rod while turning a new thread, so you can come back to the original spool, use Velcro with adhesive backing. Snip a !/4" piece. Put one section on non label side of spool. Put 1/4' piece of other Velcro on rod. It will adhere well. Turn rod for work, then remove Velcro from rod and use it again and again. Keep the piece on the spool for future use. Sanford Hochman Sorry, only registered users may post in this forum.
|