I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2018 Expo
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
All American Guides
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
Bingham Enterprises
Canada Rodbuildersupply
CRB
Cork4Us
HNL Rod Blanks–CTS
CTS New Zealand
Custom Fly Grips LLC
DBlue Fishing
Decal Connection
DONART
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rod Components USA
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Threadmaster
Posted by: Jeff Hunter (---.hsd1.wa.comcast.net)
Date: June 24, 2018 12:08PM

How soon after the initial coat can I apply a second coat of Threadmaster?

Thanks

Options: ReplyQuote
Re: Threadmaster
Posted by: roger wilson (---.hsd1.mn.comcast.net)
Date: June 24, 2018 12:24PM

Jeff,
As soon as it is not tacky.
After mixing up a bach of finish, keep it around for tacky feeling testing - without touching the rod and its potentially wet finish.

Good luck

Options: ReplyQuote
Re: Threadmaster
Posted by: Gary Kilmartin (---.sub-174-221-143.myvzw.com)
Date: June 24, 2018 05:27PM

I usually put on a second coat the next day. But, I have done it after about four hours. It will depend on the ambient temp. The cooler your space temp, the longer you will have to wait. That is using Threadmaster Lite.

Options: ReplyQuote
Re: Threadmaster
Posted by: herb canter (70.40.112.---)
Date: June 24, 2018 08:53PM

I do what Roger does, keep the cup you mixed in and if it's still sticky wait it out , Threadmaster lite takes considerably longer to be tack free even in optimal conditions.

Options: ReplyQuote
Re: Threadmaster
Posted by: Jeff Hunter (---.hsd1.wa.comcast.net)
Date: June 24, 2018 10:39PM

Thanks guys. I appreciate the info.

Options: ReplyQuote
Re: Threadmaster
Posted by: Lindsay PELLETIER (---.236.147.77.rev.sfr.net)
Date: June 25, 2018 06:37AM

Hello,

If Threadmaster High build, minimum 8 hours, maximum 24 hours. In this frame time you will have maximum chemical adhesion between each layer.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster