SPONSORS
2024 ICRBE EXPO |
Rod marker
Posted by:
Sam Lavigne
(---.cpe.cableone.net)
Date: June 18, 2018 11:08PM
What works best for marking graphite rods when measuring for guides etc.? I have used China markers in the past but was wondering if there is something that works better? Re: Rod marker
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: June 18, 2018 11:29PM
Sam,
I never like to put and or leave any marks on a rod. Rather, I just use 1/8th inch wide masking tape. Easy, quick and free of marks on the rod. Good luck Re: Rod marker
Posted by:
Robert Nypaver
(---.mnfd.centurylink.net)
Date: June 19, 2018 08:49AM
I had been using china markers. To get a mark that didn't wear off during the building process, I had to make a firm mark. Then, I would have trouble removing the mark using DNA. I then switched to 1/8" tape also and it's working just fine. Re: Rod marker
Posted by:
Ray Zarychta
(---.ri.ri.cox.net)
Date: June 20, 2018 10:45AM
China mark residue can easily be removed using a Staedtler Mars Plastic eraser. Cleans up without marring the finish and cleans up other type of mild residue also. Been using it for 25 years. Ray Zarychta Glastonbury, CT Re: Rod marker
Posted by:
John Cates
(---.sub-174-207-14.myvzw.com)
Date: June 20, 2018 11:03AM
black sharpie Flex Coat Company Professional Rod Building Supplies www.flexcoat.com Re: Rod marker
Posted by:
Chris Sparkman
(---.washdc.fios.verizon.net)
Date: June 21, 2018 08:51PM
I've always used a crayon. Works very well. Sorry, only registered users may post in this forum.
|