SPONSORS
2024 ICRBE EXPO |
American Tackle Power Wrapper Large O-Ring
Posted by:
Tony Boschi
(---.craigtechinc.com)
Date: May 04, 2018 08:57AM
Good morning all.
I just thought I would share this. My wrapper came with 2 Buna-N black rings and as expected, over time, one of the rings finally split. Not wanting to be without a "backup" ring for the wrapper, I looked around and being an Engineer, I wanted something a little "softer" and with a little more "grip". I went to McMaster Carr and was able to purchase Silicone rings for the wrapper and a better price than I was expecting. I bought 5 rings for $10.25 and have plenty or backups now. Part Number 9396K308, High-Temperature High-Purity Silicone O-Ring, 3/16 Fractional Width, Dash Number 346 Tony Boschi Banana River Rods Merritt Island, Florida 321~525~1063 * Rapid Prototyping Services * Custom Beach Rods * Custom Inshore Rods [bananariverrods.com] Re: American Tackle Power Wrapper Large O-Ring
Posted by:
Robert A. Guist
(---.dhcp.embarqhsd.net)
Date: May 04, 2018 02:31PM
Hello Toni.
Are they tougher, longer lasting, and or smaller or larger in width or thickness. In short can you explain the differences to me? Bob, New Bern, NC. Re: American Tackle Power Wrapper Large O-Ring
Posted by:
Sheridan Stanton
(---.hsd1.ca.comcast.net)
Date: May 05, 2018 09:46AM
Thanks for the tip,I have an older CPW lathe I know my time will come Re: American Tackle Power Wrapper Large O-Ring
Posted by:
Spencer Phipps
(---.hsd1.or.comcast.net)
Date: May 05, 2018 10:17AM
Robert, The standard size for the AmTack, PacBay, and CPW wrappers is a 3/16 inch belt/O ring, it's a standard industrial size you can get at any industrial supply/bearing shop. I got my supply of extras from King Bearing many years ago. Every ring on the machine is a standard size that is readily available. Re: American Tackle Power Wrapper Large O-Ring
Posted by:
Mark Talmo
(---.lightspeed.irvnca.sbcglobal.net)
Date: May 05, 2018 11:08PM
The silicone o-rings are vastly superior to the Buna-N varieties. Yes, they cost 4X as much, but now I don’t have “skid marks” around the rod and I anticipate them lasting longer as well!!! Mark Talmo FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE. Re: American Tackle Power Wrapper Large O-Ring
Posted by:
David Miller
(---.triad.res.rr.com)
Date: May 06, 2018 04:45PM
I just replaced the black ones on a Pac Bay power wrapper ,that I bought used, with the thicker yellow rings and they are vastly superior. Re: American Tackle Power Wrapper Large O-Ring
Posted by:
Tony Boschi
(---.lightspeed.dybhfl.sbcglobal.net)
Date: May 07, 2018 04:30PM
Bob,
They are the exact same size, diameter, thickness but they are Red Silicone which outlasted Buna N all day long. They are a lighter durometer, but the are totally pliable. After a month, my Buna rings showed wear, after a month of using the Silicone rings, they still look like the day they arrived. Re: American Tackle Power Wrapper Large O-Ring
Posted by:
Robert A. Guist
(---.dhcp.embarqhsd.net)
Date: May 08, 2018 12:04PM
Hello Tony.
Thanks for the info, I have only changed my rings three or four times because I use some rings a tractor repair guy gave me years ago (Don't know what they are made of) but he has passed and I am going to be looking for replacements soon. Thanks Again. Tight Wraps & Tighter Lines. Bob, New Bern, NC. Re: American Tackle Power Wrapper Large O-Ring
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: May 08, 2018 02:24PM
I bought the rings on the wrapper that I made from the local hardware store plumbing department many years ago. The rings are still just fine after many years of use.
Good luck Re: American Tackle Power Wrapper Large O-Ring
Posted by:
Larry Ohara
(---.clppva.fios.verizon.net)
Date: May 13, 2018 01:57PM
Bought these from amazon:
Small Parts 329 Silicone O-Ring, 70A Durometer, Red, 2" ID, 2-3/8" OD, 3/16" Width (Pack of 5) @ $9.11 329 Neoprene O-Ring, 70A Durometer, Round, Black, 2" ID, 2-3/8" OD, 3/16" Width (Pack of 25) @ $4.69 The silicone and the neo are running on a number of drying motors for the last 2 years. So far no different between the two. I suspect the Silicon will last longer. I also bought the little guys for at a really decent price. 212 Silicone O-Ring, 70A Durometer, Red, 7/8" ID, 1-1/8" OD, 1/8" Width (Pack of 25) @ $3.25 I think I'm good for awhile! HAPPY MOTHER's DAY! Larry Sorry, only registered users may post in this forum.
|