SPONSORS
2024 ICRBE EXPO |
Thanks, Anglers Workshop
Posted by:
Fred Zimmermann
(---.hsd1.fl.comcast.net)
Date: April 19, 2018 05:30PM
I ordered my surfrod for a new build on Monday from Anglers Workshop, chose second day air and it came on Wednesday. I chose UPS second day air and paid the extra because lately, USPS is blowing it pretty bad. I have had countless orders delayed damaged and one lost order. Didn't want to chance this one. I paid with paypal and although I made an account and was signed in when I made the order, it did not show up on my account, nor did I get a conformation email. I emailed them and told them what I had done and asked if they could add that order to my account, five minutes later, it was all there with tracking and an email stating all was there. So heads up if you use paypal to check out, no biggy though. There price on the surfrod (I got the 11' medium) [www.anglersworkshop.com] was at least 23% less than every site I could find it, and it was in stock. Although they did not have every bling add on that some of the other sites had, they had what I needed. The items were also well packed in a very sturdy box. I also heeded y'alls advice about ordering from the companies that sponsor this site. So, in all it was a very positive experience. Re: Thanks, Anglers Workshop
Posted by:
herb canter
(70.40.111.---)
Date: April 19, 2018 06:00PM
Awesome , i buy from Anglers Workshop quite a bit and have been very satisfied , they also have one of the best catalog's out there, i still love catalogs .
What surf rod did you pick up ? Re: Thanks, Anglers Workshop
Posted by:
Jay Dubay
(---.clv.wideopenwest.com)
Date: April 19, 2018 09:37PM
Same with Janns Top Notch and faster shipping then the Florida Vendors! Re: Thanks, Anglers Workshop
Posted by:
Tom Kirkman
(Moderator)
Date: April 19, 2018 09:53PM
Okay everybody - all this stuff about how great this vendor or that one is, how much better one is than another, is not the point of this forum. These past few days we're starting to go down a road I don't want to go down.
................... foam cores
Posted by:
nick saselu
(---.dyn.optonline.net)
Date: April 19, 2018 10:34PM
this question is for Tom Kirkman do you still use the method you wrote in rodmaker #10-6 on how to make foam cores.Are there and changes or do you still do as written thanks Re: Thanks, Anglers Workshop
Posted by:
Tom Kirkman
(Moderator)
Date: April 19, 2018 10:41PM
I pretty much still do them the same way. I have poured some in pans and then used a bandsaw to cut them into turning squares, but that's really just up to the user.
......... Re: Thanks, Anglers Workshop
Posted by:
Fred Zimmermann
(---.hsd1.fl.comcast.net)
Date: April 24, 2018 04:56PM
Tom Kirkman Wrote:
------------------------------------------------------- > Okay everybody - all this stuff about how great > this vendor or that one is, how much better one is > than another, is not the point of this forum. > These past few days we're starting to go down a > road I don't want to go down. > > ................... Sorry... Re: Thanks, Anglers Workshop
Posted by:
Fred Zimmermann
(---.hsd1.fl.comcast.net)
Date: April 24, 2018 05:04PM
herb canter Wrote:
------------------------------------------------------- > Awesome , i buy from Anglers Workshop quite a bit > and have been very satisfied , they also have one > of the best catalog's out there, i still love > catalogs . > > What surf rod did you pick up ? I picked this one PBX2GSU110M2 if you click on the link in my initial post it will take you there, sort of. I really wanted a slow action two piece spiral glass rod but it seems as those are are not made any longer. Just finding a medium action is worth celebrating. I am building this for my daughter, I'm sure she will get a little more distance out of it so it will be good for her. I put a split handle, the reel seat and the fore grip on yesterday. Went really well. Re: Thanks, Anglers Workshop
Posted by:
herb canter
(70.40.94.---)
Date: April 25, 2018 05:02PM
Fred Zimmermann Wrote:
------------------------------------------------------- > herb canter Wrote: > -------------------------------------------------- > ----- > > Awesome , i buy from Anglers Workshop quite a > bit > > and have been very satisfied , they also have > one > > of the best catalog's out there, i still love > > catalogs . > > > > What surf rod did you pick up ? > > I picked this one PBX2GSU110M2 if you click on the > link in my initial post it will take you there, > sort of. I really wanted a slow action two piece > spiral glass rod but it seems as those are are not > made any longer. Just finding a medium action is > worth celebrating. I am building this for my > daughter, I'm sure she will get a little more > distance out of it so it will be good for her. I > put a split handle, the reel seat and the fore > grip on yesterday. Went really well. First off let me thank you for getting back to me so soon , the rod sounds ideal for your daughter , hope she enjoys it. Sorry, only registered users may post in this forum.
|