SPONSORS
2024 ICRBE EXPO |
Looking for Aftco reel seat sleeves
Posted by:
Scott Lamb
(172.11.206.---)
Date: March 01, 2018 10:31PM
I can't find these anywhere. Anyone know where I can find one or even have one for sale? Looking for one with the 1 inch inner diameter. Re: Looking for Aftco reel seat sleeves
Posted by:
Matthew Pitrowski
(---.lightspeed.milwwi.sbcglobal.net)
Date: March 02, 2018 07:40AM
[www.anglersworkshop.com] The best day to be alive is always tomorrow !! Think out side the box when all else fails !!! Wi. Re: Looking for Aftco reel seat sleeves
Posted by:
Robert A. Guist
(---.dhcp.embarqhsd.net)
Date: March 02, 2018 10:13AM
Hello Scott.
MudHole carries them the ferrules and the nuts, you can get all the parts there. Tight Wraps & Tighter Lines. Bob, New Bern, NC. Re: Looking for Aftco reel seat sleeves
Posted by:
darrel odland
(---.lightspeed.frokca.sbcglobal.net)
Date: March 02, 2018 06:51PM
Scott, I had same issue on my last build (Sturgeon Rod) Was told by AW that they no longer carry and were unavailable. I finally bought an American Tackle Company reel seat from Mud Hole. Price is comparable and I think they have a few more choices when it come to combination of colors. I bought 3 of them and last build was very nice. Check it out!!
"Bent Rod to ya" Darrel Re: Looking for Aftco reel seat sleeves
Posted by:
Scott Lamb
(172.11.206.---)
Date: March 02, 2018 07:18PM
Looking for these [www.mudhole.com] I will email Mudhole to see if they plan to receive more as you can't add them to your cart. I will email aftco too as I am not sure they are still making them. I like them in front of the reel seat with a hypalon foregrip contacting the top of them. I really like grabbing a heavy roller guide, 50 narrow 2 speed rod and reel combo, at the sleeve when pulling out of rod holders, handling, etc. This one I want to dress up with abalone. If anyone wants to sell one they have please contact me. Re: Looking for Aftco reel seat sleeves
Posted by:
Scott Lamb
(172.11.206.---)
Date: March 02, 2018 07:21PM
I was shocked at how hard it was to find an green aftco reel seat. Found one at Donart and they were great to work with.
darrel odland Wrote: ------------------------------------------------------- > Scott, I had same issue on my last build (Sturgeon > Rod) Was told by AW that they no longer carry and > were unavailable. I finally bought an American > Tackle Company reel seat from Mud Hole. Price is > comparable and I think they have a few more > choices when it come to combination of colors. I > bought 3 of them and last build was very nice. > Check it out!! > "Bent Rod to ya" > Darrel Re: Looking for Aftco reel seat sleeves
Posted by:
Dennis Danku
(---.dyn.optonline.net)
Date: March 03, 2018 06:53PM
I think what your looking for is called a TUNA BLOCK and is used as reinforcement against crushing your rod blank. On heavy duty reels with ears for suspending clamping support, the tuna block is where the clamp adheres to. Not on the bare blank or handle material. Dennis J. Danku (Sayreville,NJ) Re: Looking for Aftco reel seat sleeves
Posted by:
Scott Lamb
(172.11.206.---)
Date: March 03, 2018 11:15PM
Yes, Dennis, that is what it is designed for. I just like it ergonomically and plan to use it for aesthetics. If I can't find one, I will just trim a slick butt I have to the length I want. The sleeves just fit perfect and are indestructible. I guess I can also trim a thinner wall polished aluminum pipe but I have to order the pipe. Sorry, only registered users may post in this forum.
|