I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2018 Expo
EXPO ON FACEBOOK
CCS Database
Int. Custom Rod Symbol
Common Cents Info
All American Guides
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
Bingham Enterprises
Canada Rodbuildersupply
CRB
Cork4Us
CTS Rod Blanks
CTS MAVEN
Custom Fly Grips LLC
Custom Labeling System
DBlue Fishing
Decal Connection
DONART
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rocky Mountain Rod Shop
Rod Components USA
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
St Croix Rods
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Fazlite
Posted by: Frazer Dougherty (---.dyn.optonline.net)
Date: February 12, 2018 12:03PM

Anyone know of the actual properties of Fuji's new Fazlite guides ???

Options: ReplyQuote
Re: Fazlite
Posted by: Chuck McIntyre (---.hsd1.co.comcast.net)
Date: February 12, 2018 01:28PM

Have to tried contacting Jim Ising,or anyone else at Anglers Resources? What specific properties are you inquiring about? Not that I would have the answers....

Options: ReplyQuote
Re: Fazlite
Posted by: Norman Miller (---.lightspeed.jcsnms.sbcglobal.net)
Date: February 12, 2018 04:19PM

All I know is that Fazlite is a new type of hard aluminum oxide material that has hardness, thermal conductivity, and bending strength properties intermediate between Alconite and Concept O (also a type of aluminum oxide). It is sort of an upgraded version of the old Hardloy guides, and this upgrade allows them to be deep pressed into the new K guide frames. I bought a few to check them out and they seem to be very nice with a blue ring, and they also come in the new corrosion control K frames. A nice thing about them is that they are quite inexpensive without being ‘cheap’. I think they are sufficiently hard and strong enough to give years of hard use without any problems. They are certainly worth a try.
Norm

Options: ReplyQuote
Re: Fazlite
Posted by: Michael Danek (---.alma.mi.frontiernet.net)
Date: February 12, 2018 06:12PM

Agree with Norm. I'll also comment that the rings are thinner than the old Hardloy, so are a better looking guide. They are NOT glossy, so if you're looking for bright, they are not the answer. I just built a KLH spinner with them in the silver, and it's a fine looking guide train. I used the gray on a caster and thought they looked a little dull. But if you're trying to avoid flash, they can do fine.

Options: ReplyQuote
Re: Fazlite
Posted by: herb canter (70.40.77.---)
Date: February 12, 2018 07:06PM

I'm seeing people asking for titanium frames with Fazlite and Concept O rings on fishing boards these days which cracks me up since Fuji has taken the stance that Alconite is not high end enough to pair with titanium frames thus the discontinuation lol. They believe anybody that goes with titanium will most assuredly go with Sic or Torzite but they were very wrong in that regard .

The cancellation of Alconite and Titanium was a monumental mistake on Fuji's part and i know some will argue otherwise but no way i'm buying it. Doesn't matter what fishing forum you go to people are outraged over it and they have every right to be.

Options: ReplyQuote
Re: Fazlite
Posted by: Michael Danek (---.alma.mi.frontiernet.net)
Date: February 13, 2018 10:33AM

I'm disappointed, but not outraged. Not "outrage-worthy," IMO.

Options: ReplyQuote
Re: Fazlite
Posted by: Jim Ising (---.dyn.centurytel.net)
Date: February 14, 2018 09:34AM

Norm has it right on FazLite. It specs better than Aluminum Oxide but just a whisker below ALCONITE in all the comparative categories. By engineering it for K-Series, Fuji is offering the most affordable "K's" to date.

As far as Titanium goes, I'll admit ALCONITE was my favorite combo as well. I also must admit that I have never known Fuji to discontinue a solid, high volume product.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster