I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

RodMaker back issues at Expo?
Posted by: michael kelley (---.ga.at.cox.net)
Date: February 01, 2018 07:16PM

Evening, this will be my first Expo attendance. Does anyone know if there will be, or have been back issues of RodMaker there?

Thank you,

Michael

Options: ReplyQuote
Re: RodMaker back issues at Expo?
Posted by: Tom Kirkman (Moderator)
Date: February 01, 2018 10:18PM

Yes. Not all of them but more than a few. Probably 45 to 50 various issues.

.................

Options: ReplyQuote
Re: RodMaker back issues at Expo?
Posted by: michael kelley (---.ga.at.cox.net)
Date: February 02, 2018 12:24PM

Thank you, sir

Options: ReplyQuote
Re: RodMaker back issues at Expo?
Posted by: Arnot Hulth (---.dhcp.embarqhsd.net)
Date: February 13, 2018 08:27PM

Tom, I have not gotten the new issue yet. Have they mailed out yet? My subscription runs out at 23-2. Thank you

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster