SPONSORS
2024 ICRBE EXPO |
Cheap Cranking Blank
Posted by:
Jay Burns
(---.excelsior.edu)
Date: January 31, 2018 03:47PM
Hey guys any suggestions on a cheap Cranking blank, 7 M or MH for throwing square bills and smaller lipless baits. Not looking for anything expensive, just a reliable cranking blank that wont break the bank. Will be built as a casting rod. Re: Cheap Cranking Blank
Posted by:
Thomas Kaufmann
(107.77.111.---)
Date: January 31, 2018 04:03PM
Rainshadow Re: Cheap Cranking Blank
Posted by:
James Taylor
(---.wavecable.com)
Date: January 31, 2018 04:08PM
The RainShadow E-Glass GCB series would be the way to go, MSRP is $40 but there’s dealers that sell it for less. They’ve been fished pretty heavily and last forever, being glass they’re fatter in the butt. [www.rainshadowrodblanks.com]
If you want to take it up to graphite then the Revelation Crankbait series has stood the test of time (previously RX7 series) and is the goto for many anglers. [www.rainshadowrodblanks.com] James Taylor Batson Enterprises BatsonEnterprises.com | RainShadowRodBlanks.com | ALPSForeCast.com | Build2Fish.com Re: Cheap Cranking Blank
Posted by:
Thomas Kaufmann
(107.77.111.---)
Date: February 02, 2018 03:12PM
Jay,
Get bit has a special on white 7’0” medium blanks Re: Cheap Cranking Blank
Posted by:
Dennis Danku
(---.dyn.optonline.net)
Date: February 02, 2018 07:23PM
Shikari #CB703 Dennis J. Danku (Sayreville,NJ) Sorry, only registered users may post in this forum.
|