I nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods
Goto Topic: Previous•Next
Goto: Forum List•Message List•New Topic•Search•Log In Or Register•Print View
Labels
Posted by: Ralph serago (---.hsd1.pa.comcast.net)
Date: January 24, 2018 09:21PM

Has anyone used a Brother P-Touch to make labels

Options: Reply•Quote
Re: Labels
Posted by: Matthew Pitrowski (---.lightspeed.milwwi.sbcglobal.net)
Date: January 25, 2018 10:44AM

have you tried a test label ? best place to start

The best day to be alive is always tomorrow !!
Think out side the box when all else fails !!!
Wi.

Options: Reply•Quote
Re: Labels
Posted by: Tom Kirkman (Moderator)
Date: January 25, 2018 10:51AM

Do a search here. Many people have done what you're asking about and there are many results and tips posted over the past decade regarding the P-Touch.

..................

Options: Reply•Quote
Re: Labels
Posted by: Jeff Mayfield (---.wm.com)
Date: January 25, 2018 03:33PM

Hello Ralph,

Yes I have used one many times and have not had any issues with the labels. I do tapper the ends and put a thread wrap on both ends.

Options: Reply•Quote
Re: Labels
Posted by: Larry Tobin (---.hsd1.fl.comcast.net)
Date: January 25, 2018 07:46PM

Check out the "Custom Labeling System" link on this site. This label printer prints at 360 DPI comes with a Lifetime Warranty and printers with Metallic Silver ribbon, Gold ribbon, White ribbon and Black ribbon. We have sold over 400 custom rod builders this line of printer and comes with Free Service and Training - 7 days a week.

Larry Tobin
LRT Group, Inc.
www.lrtgroup.com
larry@lrtgroup.com
954-257-6224

Options: Reply•Quote
Re: Labels
Posted by: Lance Schreckenbach (---.hfc.comcastbusiness.net)
Date: January 25, 2018 08:05PM

I use one and have found it works best if you put a coat of epoxy on first before applying the label/decal. I also use CP over the top of the decal and around the edges to keep epoxy from getting underneath and pealing it up.

Options: Reply•Quote
Re: Labels
Posted by: John Keough (---.bltmmd.fios.verizon.net)
Date: January 27, 2018 12:11PM

I purchased a printer from Larry @ LRT group and support and software is great. You can use it for lableling you shop too.

Options: Reply•Quote
Re: Labels
Posted by: Larry Tobin (---.hsd1.fl.comcast.net)
Date: February 09, 2018 01:38PM

Hi Ralph,

If your going to the show in Winston-Salem, NC, I will have my Custom Label Printers. This way you want see what the labels look like.

Larry Tobin
LRT Group, Inc.
www.lrtgroup.com
larry@lrtgroup.com
954-257-6224

Options: Reply•Quote


Goto: Forum List•Message List•Search•Log In Or Register
Sorry, only registered users may post in this forum.
Click here to login
Webmaster