SPONSORS
2024 ICRBE EXPO |
American Tackle Power Wrapper
Posted by:
Tony Boschi
(172.58.3.---)
Date: January 12, 2018 05:04PM
I have an American Tackle Power Wrapper with the dryer. The wrapper spins "away" from me, which is great. The dryer spins "towards" me, which is what I want to change.
If it were a 12 volt motor, geat, I would reverse the wires/polarity and fix the problem. Is there SOMETHING I can do? Re: American Tackle Power Wrapper
Posted by:
Matthew Pitrowski
(---.lightspeed.milwwi.sbcglobal.net)
Date: January 12, 2018 05:19PM
try this turn on the drier motor and stall it and see if it reverses direction as some of them do reverse direction if you do that . The best day to be alive is always tomorrow !! Think out side the box when all else fails !!! Wi. Re: American Tackle Power Wrapper
Posted by:
Tony Boschi
(172.58.3.---)
Date: January 12, 2018 05:42PM
Mathew,
YOU Sir, are a GENIUS! It worked! Thank you! Re: American Tackle Power Wrapper
Posted by:
Matthew Pitrowski
(---.lightspeed.milwwi.sbcglobal.net)
Date: January 12, 2018 05:56PM
not a genius just been doing this a long time and got the experience from having to build a lot of my own equipment as a lot of it wasn't available to the general public way back when I started building. always happy to help a fellow builder The best day to be alive is always tomorrow !! Think out side the box when all else fails !!! Wi. Re: American Tackle Power Wrapper
Posted by:
Lance Schreckenbach
(---.lightspeed.hstntx.sbcglobal.net)
Date: January 12, 2018 08:31PM
Sometimes you need to turn it in the direction you want it to go when it is off and when you turn it on again will go that way most of the time. Not sure why they do that anyway. Sorry, only registered users may post in this forum.
|