SPONSORS
2024 ICRBE EXPO |
Custom butt caps
Posted by:
Chad St.Amand
(---.bchsia.telus.net)
Date: November 13, 2017 12:41AM
Hey Guys,
I am looking for some one who can make me some custom butt caps with my logo on them? Thanks Chad Re: Custom butt caps
Posted by:
Buzz Butters
(---.dhcp.fdul.wi.charter.com)
Date: November 13, 2017 10:10AM
Chad, post if you find someone, I am in the same pickle. buzz Re: Custom butt caps
Posted by:
Matthew Pitrowski
(---.lightspeed.milwwi.sbcglobal.net)
Date: November 13, 2017 12:25PM
Why the one part of the rod that is least seen,and most abused . a better place for your logo is on the blank it self near the fore grip specs on one side and the logo on the other, both just splitting the center point of the blank accent wrap and finish The best day to be alive is always tomorrow !! Think out side the box when all else fails !!! Wi. Re: Custom butt caps
Posted by:
Donald La Mar
(---.lightspeed.lsvlky.sbcglobal.net)
Date: November 13, 2017 12:52PM
If you use cork, you could use a small branding iron, similar to those for wine bottles. Re: Custom butt caps
Posted by:
Spencer Phipps
(172.58.41.---)
Date: November 13, 2017 01:01PM
Talk with Pac Bay, Batson, etc. They've done custom stuff before. There will be minimum ordering for the production costs. Re: Custom butt caps
Posted by:
Michael Danek
(---.drr02.mskg.mi.frontiernet.net)
Date: November 13, 2017 05:12PM Re: Custom butt caps
Posted by:
Robert A. Guist
(---.dhcp.embarqhsd.net)
Date: November 14, 2017 01:46PM
Hello Chad.
What Kind of LOGO, a picture or just writing or maybe both? Get a Scrimshaw machine or get someone that has one to do some work on store bought or your own home made caps. There are a lot of way's to customize butt caps. If Cork you can countersink the butt end and insert a coin or button then epoxy over the top. If Metal, Scrimshaw or even painting then a protective clear coating of some sort. If Wood, you can do so many things with wood it is hard to find a starting point, lathe, etch, carve, paint, stickers... Tight Wraps & Tighter Lines. Bob, New Bern, NC. Re: Custom butt caps
Posted by:
Mat Peirce
(---.honcompany.com)
Date: November 14, 2017 05:46PM
or countersink and add a dometag style sticker in cork - lots of people are doing that lately Sorry, only registered users may post in this forum.
|