I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2018 Expo
Common Cents Info
CCS Database
Int. Custom Rod Symbol
All American Guides
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
Bingham Enterprises
Canada Rodbuildersupply
CRB
Cork4Us
CTS Rod Blanks
CTS MAVEN
Custom Fly Grips LLC
Custom Labeling System
DBlue Fishing
Decal Connection
DONART
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rocky Mountain Rod Shop
Rod Components USA
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
St Croix Rods
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

new guy from down under
Posted by: Lynn Behler (---.97.252.156.res-cmts.leh.ptd.net)
Date: November 12, 2017 06:11PM

Can't someone offer advice to Ben Pitt in his surf rod question 10 posts previous to this?

Options: ReplyQuote
Re: new guy from down under
Posted by: Michael Shea (---.128.200.180.grapevine.net.au)
Date: November 13, 2017 10:12PM

Done, although I threw more options at him! The problem with this forum is that when you reply, it doesn't bring it back up the top.

Options: ReplyQuote
Re: new guy from down under
Posted by: Lynn Behler (---.97.252.156.res-cmts.leh.ptd.net)
Date: November 14, 2017 06:41PM

I thinks it works out for the best as it is now in the long run. The search thing could be better. Anyway, thanks for helping the guy out.

Options: ReplyQuote
Re: new guy from down under
Posted by: Tom Kirkman (Moderator)
Date: November 14, 2017 07:37PM

If you wish to follow a topic you can select that in your panel options and you will be notified by email whenever a response is add to that topic.

..............

Options: ReplyQuote
Re: new guy from down under
Posted by: Ben Pitt (203.46.137.---)
Date: November 15, 2017 05:08PM

Thanks for the support Lynn, much appreciated!

And thanks again Michael for your earlier post. Like I said, I've got some homework to do yet it seems. The suggestions are certainly appreciated.

Regards

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster