SPONSORS
2024 ICRBE EXPO |
Loose real seat
Posted by:
Drew Klein
(---.cpe.townisp.com)
Date: October 28, 2017 09:37PM
Found an old Ted Williams Sears Roebuck rod at a yard sale for a dollar. Nothing special but I thought it would be fun. When I was at home I found that the reel seat is loose, spins al the way around.. Does any one have any tips how to secure it again with taking the whole thing apart?
Thanks. Re: Loose real seat
Posted by:
Spencer Phipps
(---.hsd1.or.comcast.net)
Date: October 28, 2017 11:13PM
Lots of ideas in the search function above Drew. Re: Loose real seat
Posted by:
Michael Danek
(---.alma.mi.frontiernet.net)
Date: October 29, 2017 07:57AM
Drill a couple small holes, inject structural epoxy, not wrap epoxy. Some old less expensive rods had cardboard shims. Make sure you can feel the epoxy "grip" after you inject to be sure you're on both sides of any shims in there. Re: Loose real seat
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: October 29, 2017 09:39AM
Drew,
The very best idea is to remove the butt grip, remove the reel seat. Reglue the reel seat and arbor if necessary and then install a new butt grip. Good luck Re: Loose real seat
Posted by:
Paul Darby
(---.pn.at.cox.net)
Date: October 29, 2017 11:49AM
Does the rod have foam or cork grips? Re: Loose real seat
Posted by:
Jay McKnight
(---.dhcp.bycy.mi.charter.com)
Date: October 29, 2017 03:26PM
Michael Danek Wrote:
------------------------------------------------------- > Drill a couple small holes, inject structural > epoxy, not wrap epoxy. Some old less expensive > rods had cardboard shims. Make sure you can feel > the epoxy "grip" after you inject to be sure > you're on both sides of any shims in there. This works. Re: Loose real seat
Posted by:
Drew Klein
(---.cpe.townisp.com)
Date: October 29, 2017 08:17PM
Cork grips, pretty worn and slick.
Thanks all, I’ll give drilling a couple holes a shot. Drew Re: Loose real seat
Posted by:
Bill Sidney
(---.gci.net)
Date: October 30, 2017 03:15PM
Drew if you use the liquid epoxy , TURKEY baster for basting is great to inject it [ clean with D.A. first ] can get them in most places that sell TURKEY FRYERS .,
what I use , it is the cheep fix, you can remove seat [more work] an redo it , it is up to you William Sidney AK Re: Loose real seat
Posted by:
Michael Danek
(---.alma.mi.frontiernet.net)
Date: October 31, 2017 10:38AM
If you choose to repair, you might want to add a Winn Grip tape job to it when you've successfully tightened up the grip. It won't be slick any more. Sorry, only registered users may post in this forum.
|