SPONSORS
2024 ICRBE EXPO |
Fenwick SH1441 F
Posted by:
Rob Warren
(---.east.dsl.telkomsa.net)
Date: October 17, 2017 09:38AM
Hey Guys
A customer of mine recently found a new old stock Fenwick flyrod really long for a flyrod I have been tasked with building the rod as close to original as possible but cannot find any info on what it should look like. Also the reel seat diameter is large at 18mm(just under 3/4 inch) and I cannot find a flyrod vintage looking reel seat of that size. Can anyone help as this kind of gear is really difficult to source out here in South Africa. Thanks Rob Motto of the day:Build your rods for anybody but especially those that come after. Re: Fenwick SH1441 F
Posted by:
Spencer Phipps
(172.58.41.---)
Date: October 17, 2017 12:05PM
It's not a fly blank, but you can build what you want from it. "F" are fly blanks, "SH" are steelhead gear blanks. Re: Fenwick SH1441 F
Posted by:
Jay McKnight
(---.dhcp.bycy.mi.charter.com)
Date: October 17, 2017 04:45PM
Spencer Phipps Wrote:
------------------------------------------------------- > It's not a fly blank, but you can build what you > want from it. "F" are fly blanks, "SH" are > steelhead gear blanks. Bingo. Not a fly rod blank, nice old steelhead rod blank though. Re: Fenwick SH1441 F
Posted by:
Jay McKnight
(---.dhcp.bycy.mi.charter.com)
Date: October 17, 2017 04:45PM
Spencer Phipps Wrote:
------------------------------------------------------- > It's not a fly blank, but you can build what you > want from it. "F" are fly blanks, "SH" are > steelhead gear blanks. Bingo. Not a fly rod blank, nice old steelhead rod blank though. Re: Fenwick SH1441 F
Posted by:
Matthew Pitrowski
(---.lightspeed.milwwi.sbcglobal.net)
Date: October 17, 2017 05:42PM
yes it is a steel head blank and the f stands for ferrule The best day to be alive is always tomorrow !! Think out side the box when all else fails !!! Wi. Sorry, only registered users may post in this forum.
|