I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2018 Expo
Common Cents Info
CCS Database
Int. Custom Rod Symbol
All American Guides
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
Bingham Enterprises
Canada Rodbuildersupply
CRB
Cork4Us
CTS Rod Blanks
CTS MAVEN
Custom Fly Grips LLC
Custom Labeling System
DBlue Fishing
Decal Connection
DONART
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rocky Mountain Rod Shop
Rod Components USA
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
St Croix Rods
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

CP
Posted by: Rick Provencher (---.phnx.qwest.net)
Date: October 02, 2017 06:03PM

When putting down gold foil for decorative butt section I have been having a problem a couple times of the glue being used reacting with epoxy and getting major fisheyes.

If I was to put a layer of color protector over the foil before applying the epoxy do you think it would seal it and allow the LS to bond properly?

Thanks Rick

Options: ReplyQuote
Re: CP
Posted by: Michael Danek (---.alma.mi.frontiernet.net)
Date: October 02, 2017 06:17PM

I think it would, but recommend, now that you've found a problem, that you test the solution. Simply do what you plan on a scrap blank section and see if it works.

Options: ReplyQuote
Re: CP
Posted by: Lynn Behler (---.97.252.156.res-cmts.leh.ptd.net)
Date: October 02, 2017 07:26PM

It should. Do as Michael said. More than one coat would be best.



Edited 1 time(s). Last edit at 10/02/2017 07:28PM by Lynn Behler.

Options: ReplyQuote
Re: CP
Posted by: Chris Richer (131.137.243.---)
Date: October 03, 2017 10:12AM

you could probably secure the foil with colour preserver.

Chris Richer
Iroquois ON

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster