SPONSORS
2024 ICRBE EXPO |
Epoxy over Spar Urethane
Posted by:
Greg L Hall
(---.static.leds.al.charter.com)
Date: September 22, 2017 02:39PM
I just refinished a fiberglass rod blank with 3 coats of Helmsman Spar Urethane. Can I coat the thread wraps with Prokote Epoxy, or do I need to use Spar Urethane?
Greg Re: Epoxy over Spar Urethane
Posted by:
Tom Kirkman
(Moderator)
Date: September 22, 2017 03:32PM
You can use epoxy on the wraps. No problem.
............ Re: Epoxy over Spar Urethane
Posted by:
Stanley Thurman
(---.dyn.centurytel.net)
Date: October 01, 2017 02:43AM
How is tha spar looking and had any issues with it? Just finishied stripping 4 rods and ready for a coat of finish. My first time was going to use UB40, a 2k clear coat, and possibly the Hellmann spar. Just curious. I’m out of town and was going to get the supplies as soon as I get back. Two I’m painting, other two I’m finishing raw/natural. Sorry, only registered users may post in this forum.
|