I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2018 Expo
Common Cents Info
CCS Database
Int. Custom Rod Symbol
All American Guides
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
Bingham Enterprises
Canada Rodbuildersupply
CRB
Cork4Us
CTS Rod Blanks
CTS MAVEN
Custom Fly Grips LLC
Custom Labeling System
DBlue Fishing
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Hitena USA
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rocky Mountain Rod Shop
Rod Components USA
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
St Croix Rods
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Blank search
Posted by: Jerry Haight (---.sub-70-210-64.myvzw.com)
Date: September 11, 2017 02:01PM

I'm searching for a 2 piece 8' jigging rod for salmon. I can find 8'6" no problem but having trouble locating an 8'er. Really don't want to hack the ends off either. Any help would be much appreciated.

Options: ReplyQuote
Re: Blank search
Posted by: Terry Kirk (---.ks.ks.cox.net)
Date: September 11, 2017 02:57PM

I bet Batson will have something for you.

Options: ReplyQuote
Re: Blank search
Posted by: Matthew Paul (---.lightspeed.milwwi.sbcglobal.net)
Date: September 11, 2017 04:17PM

spinning or casting lure weight 1 or 2 piece all would help to get you where you want to be !

there is this one comes in at 8 ft /2 piece with a 80 dollar price [rodgeeks.com]

just because it doesn't say jigging rod doesn't mean it won't work there al so some that come in at 7 ft 11 inches if that would work

The best day to be alive is always tomorrow !!
Think out side the box when all else fails !!!
Wi.



Edited 3 time(s). Last edit at 09/11/2017 05:36PM by Matthew Paul.

Options: ReplyQuote
Re: Blank search
Posted by: Jerry Haight (---.sub-70-210-74.myvzw.com)
Date: September 11, 2017 07:15PM

Thanks Paul. I looked at.rodgeeks but didn't see anything. I will look again.

Options: ReplyQuote
Re: Blank search
Posted by: Jerry Haight (---.sub-70-210-74.myvzw.com)
Date: September 11, 2017 07:22PM

Could you tell me where your finding this Rodgeeks blank. I'm not seeing any.

Options: ReplyQuote
Re: Blank search
Posted by: Spencer Phipps (---.hsd1.or.comcast.net)
Date: September 11, 2017 09:47PM

Batson Rainshadow SW967F-M will work very well.

Options: ReplyQuote
Re: Blank search
Posted by: Matthew Paul (---.lightspeed.milwwi.sbcglobal.net)
Date: September 11, 2017 10:20PM

sent you an e mail Jerry

The best day to be alive is always tomorrow !!
Think out side the box when all else fails !!!
Wi.

Options: ReplyQuote
Re: Blank search
Posted by: ben belote (---.zoominternet.net)
Date: September 12, 2017 12:36PM

hi Matthew..just wondering..if your not alive today is there a tomorrow.lol.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster