SPONSORS
2024 ICRBE EXPO |
New member long time lurker! I built a wrapping jig others may be able to get some ideas from...
Posted by:
Kevin Connell
(---.alliancecable.net)
Date: September 03, 2017 09:53AM
Just wanted to say thanks for allowing me to join and I have used the board a lot as a lurker trying to figure out more info on wrapping jigs. I finished up a new wrapping jig made out of crutches and a plastic cutting board that I wanted to share and possibly get some input on. I thought it may give people some ideas on making a jig and if anyone has an thoughts on improvements, I would love to hear them as well!
[youtu.be] That is the YouTube video I made that shows some of what went into making it and a short demo of operation. Thanks! Edited 2 time(s). Last edit at 09/03/2017 10:09AM by Kevin Connell. Re: New member long time lurker! I built a wrapping jig others may be able to get some ideas from...
Posted by:
Donald R Campbell
(---.socal.res.rr.com)
Date: September 03, 2017 10:53AM Re: New member long time lurker! I built a wrapping jig others may be able to get some ideas from...
Posted by:
ben belote
(---.zoominternet.net)
Date: September 03, 2017 10:53AM
hi Kevin..that is so clever..i love stuff like this, thanks! Re: New member long time lurker! I built a wrapping jig others may be able to get some ideas from...
Posted by:
Kevin Connell
(---.mycingular.net)
Date: September 03, 2017 12:19PM
Thank y'all! Re: New member long time lurker! I built a wrapping jig others may be able to get some ideas from...
Posted by:
Matthew Pitrowski
(---.lightspeed.milwwi.sbcglobal.net)
Date: September 03, 2017 08:42PM
very nice job in constructing you wrapper with a bit more you could make it a power wrapper good to see that you think out of the box? The best day to be alive is always tomorrow !! Think out side the box when all else fails !!! Wi. Re: New member long time lurker! I built a wrapping jig others may be able to get some ideas from...
Posted by:
Grant Darby
(---.wavecable.com)
Date: September 03, 2017 09:25PM
Really nice, great vid. That puts my Sully's to shame. 5 stars for you!! Re: New member long time lurker! I built a wrapping jig others may be able to get some ideas from...
Posted by:
Kevin Connell
(---.alliancecable.net)
Date: September 03, 2017 11:58PM
Grant Darby Wrote:
------------------------------------------------------- > Really nice, great vid. That puts my Sully's to > shame. 5 stars for you!! The Sully was one of the hand wrapping devices I studied up on! I liked a lot about it and that is where the spring thread clamping idea came from. What I didn't like about them is how loose the supports seemed to be on the dovetail they slide in and I also prefer to have my line lay on the blank at the front where I can see it better from a seated position. Re: New member long time lurker! I built a wrapping jig others may be able to get some ideas from...
Posted by:
Kevin Connell
(---.alliancecable.net)
Date: September 04, 2017 12:02AM
Matthew Paul Wrote:
------------------------------------------------------- > very nice job in constructing you wrapper with a > bit more you could make it a power wrapper good to > see that you think out of the box? Hey, thanks for the subscription on YouTube! It wouldn't take much to make it a power wrapper at all. Re: New member long time lurker! I built a wrapping jig others may be able to get some ideas from...
Posted by:
Paul Luechtefeld
(---.mobile.att.net)
Date: January 22, 2019 10:49PM
Hi Kevin
I dont know if you will even see this but I am interested in buying one of your wrappers do you still have them? Re: New member long time lurker! I built a wrapping jig others may be able to get some ideas from...
Posted by:
Kevin Connell
(---.alliancecable.net)
Date: January 22, 2019 11:32PM
Paul Luechtefeld Wrote:
------------------------------------------------------- > Hi Kevin > > I dont know if you will even see this but I am > interested in buying one of your wrappers do you > still have them? Yes sir, I am still making them. I put a link in the YouTube video in the description box. I saw your question on YouTube and answered it there as well. Thanks again for checking in with me on the wrappers! In case anyone else reads this, I ended up designing and selling hand wrappers online and have a lot of positive feedback on them. They really work well! Here is a link to my YouTube video that is extremely long but I wanted people to know exactly what they were getting and how to use it if they decided they wanted one. [youtu.be] If anyone has any questions about them, please let me know! Re: New member long time lurker! I built a wrapping jig others may be able to get some ideas from...
Posted by:
Paul Luechtefeld
(---.mobile.att.net)
Date: January 23, 2019 02:52PM
Thank you for the quick responses Re: New member long time lurker! I built a wrapping jig others may be able to get some ideas from...
Posted by:
Kevin Connell
(---.alliancecable.net)
Date: January 23, 2019 03:24PM
No problem! Sorry, only registered users may post in this forum.
|