I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2018 Expo
Common Cents Info
CCS Database
Int. Custom Rod Symbol
All American Guides
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
Bingham Enterprises
Canada Rodbuildersupply
CRB
Cork4Us
CTS Rod Blanks
CTS MAVEN
Custom Fly Grips LLC
Custom Labeling System
DBlue Fishing
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rocky Mountain Rod Shop
Rod Components USA
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
St Croix Rods
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Back to it...
Posted by: Drew Pollock (---.218-62-69.ftth.swbr.surewest.net)
Date: August 10, 2017 11:00PM

Greetings to all. I've been away from building rods for 4-5 years. But I've been fishing the rods I built (a lot) and have accumulated enough breakage to get the rod building stuff back out and get going again. My rod building equipment has been in the attic, and I got it out this week. I have rods on the dryer as we speak.

First, let me say thank you to St Croix, Pacific Bay and Batson. All have provided warranty service in one form or the other. I have a broken switch rod, a broken normal fly rod and a previously broken spinning rod that have been piling up and awaiting renewed interest in fixing the rods that broke, and making a few more. All the breakage was basically my fault (except the rod my brother stepped on!), and fully disclosed.

My absolute favorite rod that I have built is an 8 weight 9'6" SCV St Croix fly rod. I built it in the winter of 2013 and it's been awesome from the day it was made. I have caught hundreds of Alaskan Coho salmon on it. Seriously it gets no better than this. I would guess that 99% of the blanks I buy from now on, will be St Croix. I have not broken this one. The only St Croix I broke, was a spinning rod, that was hit by a heavy lure that was recoiling off a snag and then folded where hit. That rod, is back in service. Thank you, St Croix, they are the best.

Anyway, happy to be back, and I'm sure I'll have questions for the collective.

Here's the first one: What is the experience with "rodgeeks" blanks? They are new since I was last here. They look pretty good, but I have no idea what "Carbon 4" means.

Drew

Options: ReplyQuote
Re: Back to it...
Posted by: Mark Hahn (---.150.18.98.dynamic.ip.windstream.net)
Date: August 10, 2017 11:43PM

Rodgeeks makes an excellent product.

Options: ReplyQuote
Re: Back to it...
Posted by: Spencer Phipps (---.hsd1.or.comcast.net)
Date: August 10, 2017 11:48PM

St. Croix SCIV graphite is similar to the Rod Geeks Carbon 4.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster