SPONSORS
2024 ICRBE EXPO |
Foggy Flex Coat
Posted by:
Dane Griffin
(---.au-net.ne.jp)
Date: August 02, 2017 11:10PM
Hello,
I have some high build flex coat resin that has "fogged up" I warmed it up and mixed it around and it has gone back to clear but am afraid to use it now. Has anyone else had this problem? Re: Foggy Flex Coat
Posted by:
Bill Sidney
(---.gci.net)
Date: August 02, 2017 11:29PM
the clear white one can become fogged to a white rock TEMP will cause it , warm it up some over 70 deg, F not HOT , I like hot water to do it , some of use a LAMP in a box , Microwave , there pocket , hot water, it all depends on how fast you need it, an an where you work in your shop / house William Sidney AK Re: Foggy Flex Coat
Posted by:
Jay Dubay
(---.try.wideopenwest.com)
Date: August 03, 2017 04:34AM
Perfectly Normal, As Bill said warm it up, All will be fine, Tight Lines! Jaa Re: Foggy Flex Coat
Posted by:
John Cates
(---.sub-70-195-202.myvzw.com)
Date: August 03, 2017 01:07PM
Bill said it, Jay agreed and I concur.
Thanks Flex Coat Company Professional Rod Building Supplies www.flexcoat.com Re: Foggy Flex Coat
Posted by:
Dane Griffin
(65.99.32.---)
Date: August 04, 2017 08:01AM
Perfect that's all I needed. Thank you for contributing! Sorry, only registered users may post in this forum.
|