I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2018 Expo
Common Cents Info
CCS Database
Int. Custom Rod Symbol
All American Guides
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
Bingham Enterprises
Canada Rodbuildersupply
CRB
Cork4Us
CTS Rod Blanks
CTS MAVEN
Custom Fly Grips LLC
Custom Labeling System
DBlue Fishing
Decal Connection
Flex Coat Co.
Get Bit Outdoors
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rocky Mountain Rod Shop
Rod Components USA
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
St Croix Rods
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

Final finish coat
Posted by: Jeff Mayfield (---.sub-70-214-46.myvzw.com)
Date: July 30, 2017 05:29PM

Hi All,

I just applied the final finish coat to rod I have been working on. In the dragon wrap portion I wound up with a blemish. Is it possible to only epoxy a portion of a butt wrap?

Options: ReplyQuote
Re: Final finish coat
Posted by: Matthew Paul (---.lightspeed.milwwi.sbcglobal.net)
Date: July 30, 2017 05:51PM

scuff the blem lightly and apply a touch of finish it will blend in and won't be noticeable

The best day to be alive is always tomorrow !!
Think out side the box when all else fails !!!

Options: ReplyQuote
Re: Final finish coat
Posted by: Michael Danek (---.mskg.mi.frontiernet.net)
Date: July 30, 2017 05:53PM

I would simply fix the blemish and put another coat over the whole thing. I think that trying to blend the two areas may not be effective. If you have natural "stop" for one section, like the end of a decal or something like that, then there is logic in seeing a change in the level of the finish, and a clean line becomes acceptable to the eye. Otherwise, I don't think partial coverage will work well enough.

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster