SPONSORS
2024 ICRBE EXPO |
NEW CATALOG from Anglers Resource
Posted by:
Jim Ising
(---.dyn.centurytel.net)
Date: July 27, 2017 11:44AM
If you subscribe to RodMaker Magazine you will be receiving a copy of our latest catalog in a future issue. If you do not get the magazine or you want to have a handy electronic copy for reference, you can download one here - [www.dropbox.com]
Lots of important and exciting new products in this years catalog including: 1) Details and selection for Fuji's new "CC" Corrosion CONTROL frames. This innovation results in a stainless guide that is 7-times more corrosion resistant than standard stainless. Fuji has introduced it in two colors - A matte silver (CC) and a matte dark grey (BC). It will be available across the entire K-Series line, including the KL-H KR Concept guides and the KB an KT runners. It will be available in ALCONITE® and new FazLite™ rings (more below) 2) Details and selection on new Gun Metal Corrosion CONTROL frames. This is a dark grey Corrosion CONTROL frame with a satin/semi-gloss finish available only with SiC rings and only in K-Series. 3) Details and selection of new T2 Black Titanium (Wow!). This an a very dark, satin finished titanium offering the "black" look at lower total guide train weight than ever before. When the words "FUJI" and "Titanium" are stamped into the frame the letters have a silver embossed look that shows up really well against the dark finish - very high end look! Available across the K-Series line. 4) Details on the new LRV casting guides. These are reverse guides like the RV but they are tailored to New Guide Concept heights (very cool). Available in size 6 thru 10 in Titanium TORZITE® and SiC only. 5) Details and selection of new FazLite™ ring material. This is Fuji's solution to a making the K-Series an economical choice for ANY build on ANY blank. The ring was created specifically for the K-Series and while it does not measure up to ALCONITE® it tests better than Aluminum Oxide. Bottom line: the lowest priced K-Series guides EVER. Available across the K-Series line AND with CC and BC Corrosion CONTROL frames. 6) Expanded Perfect fit winding check sizes...down to a 9mm ID and all the way up to a 15.5mm ID 7) Addition of an 8 Ft Medium Extra Fast Point BLANK. Crankbaits, poppin' cork, swimbaits... 8) A new "Micro Trigger" PMTS casting seat. Less fatigue with no loss of control. Lighter weight too. 9) A scaled down trigger Palm Support seat, PULS that allows switching from 3-fingers forward to 4-fingers forward for better hook-set control and fish wrangling. PLUS: Lots of information and support for NGC and KR. Hope you enjoy the new stuff!!! [www.dropbox.com] Sorry, only registered users may post in this forum.
|