I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Point blank perfect fit hardware
Posted by: mike langevin (---.sub-70-214-83.myvzw.com)
Date: June 20, 2017 02:41PM

If I want a pb701mhf blank is there a resource that would indicate all the perfect fit hardware that would fit that blank? Or do I have to order the blank first and measure for all the winding checks and stuff?

Options: ReplyQuote
Re: Point blank perfect fit hardware
Posted by: Mel Shimizu (---.socal.res.rr.com)
Date: June 20, 2017 03:40PM

If you are buying from Mudhole, then call them to furnish all your components. Of course you need to tell them the dimensions of your handle but they should be able to do it for you.

Options: ReplyQuote
Re: Point blank perfect fit hardware
Posted by: bud bassett (---.new.res.rr.com)
Date: June 20, 2017 07:04PM

Call Anglers Resource. They will set you up.

Options: ReplyQuote
Re: Point blank perfect fit hardware
Posted by: Spencer Phipps (---.hsd1.or.comcast.net)
Date: June 20, 2017 10:11PM

The specs are there for each blank, the taper on the last 12-14 inches is pretty non-existent less than .5 mm.

Options: ReplyQuote
Re: Point blank perfect fit hardware
Posted by: Jim Ising (---.dyn.centurytel.net)
Date: June 21, 2017 09:45AM

Diameter of 14.26mm o the 701MHF. Order 14.5mm winding checks.

Options: ReplyQuote
Re: Point blank perfect fit hardware
Posted by: mike langevin (---.sub-70-214-79.myvzw.com)
Date: June 21, 2017 11:00AM

Thanks I'm on it!

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster