SPONSORS
2024 ICRBE EXPO |
Help Neded - Fuji BGKS16RC in MN
Posted by:
Nate Nelson
(---.hsd1.mn.comcast.net)
Date: April 28, 2017 04:08PM
I am hoping that someone on here can help. I finally recived a back ordered blank and planned to build it this weekend for delivery next week. When installing the cork reel seat, specifically the SK2 with Fuji BGKS16RC cork the cork slip in half.
Does anyone in the Minneapolis/St. Paul metro area happen to have a Fuji BGKS16RC I could buy from you? I'm willing to pay retail price and would come pick it up. Re: Help Neded - Fuji BGKS16RC in MN
Posted by:
Matthew Pitrowski
(---.lightspeed.milwwi.sbcglobal.net)
Date: April 28, 2017 05:20PM
could you possibly glue it with out an unsightly seam ?? and them ream it to fit ??
to glue it I would use clear epoxy and apply a thin coat to the cracks and line them up clean off the excess with DA or acetone and tape them with electrical tape as it will stretch and hold the seam to a minimum after it is cured lightly sand it and ream it to fit properly JM2C. The best day to be alive is always tomorrow !! Think out side the box when all else fails !!! Wi. Edited 1 time(s). Last edit at 04/28/2017 05:22PM by Matthew Paul. Re: Help Neded - Fuji BGKS16RC in MN
Posted by:
Nate Nelson
(---.hsd1.mn.comcast.net)
Date: April 28, 2017 08:29PM
Unfortunately not, some of the cork splintered off when it broke...
This rod build is cursed. Re: Help Neded - Fuji BGKS16RC in MN
Posted by:
Norman Miller
(---.lightspeed.jcsnms.sbcglobal.net)
Date: April 28, 2017 11:21PM
If you can not find one in your area, I have a couple and could spare one, but live in MS. Could send it 2 day priority mail and you would get early next week. I can glue it to the hood if you wish so you would not need to worry about it breaking again. Just let me know.
Norm Re: Help Neded - Fuji BGKS16RC in MN
Posted by:
Buzz Butters
(---.dhcp.fdul.wi.charter.com)
Date: April 29, 2017 02:00PM
Nate,
i put that into the Mud Hole site. Is it EVA or cork? Im pretty sure I might have them both. Central Wisconsin Buzz Re: Help Neded - Fuji BGKS16RC in MN
Posted by:
Buzz Butters
(---.dhcp.fdul.wi.charter.com)
Date: April 29, 2017 02:03PM
With Spee Dee delivery it is a one day shipping. Email me
Buzz Re: Help Neded - Fuji BGKS16RC in MN
Posted by:
Nate Nelson
(---.hsd1.mn.comcast.net)
Date: May 01, 2017 05:02PM
Thanks for the help everyone, I ended up placing another order with my supplier and added the cork onto it. Sorry, only registered users may post in this forum.
|