I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2017 Expo!
Common Cents Info
CCS Database
Int. Custom Rod Symbol
All American Guides
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
Bingham Enterprises
Canada Rodbuildersupply
CRB
Cork4Us
CTS Rod Blanks
CTS MAVEN
Custom Fly Grips LLC
Custom Labeling System
DBlue Fishing
Decal Connection
DONART
Flex Coat Co.
Get Bit Outdoors
Get Rod Blanks.com
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rocky Mountain Rod Shop
Rod Components USA
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
St Croix Rods
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

rod dryer drying tip
Posted by: Matthew Paul (---.lightspeed.milwwi.sbcglobal.net)
Date: April 20, 2017 12:37AM

just finished assembling a 3 station rod dryer set up and picked up 3- 9 rpm motors and hooked them up to a control board best thing I ever did as you can change the rotation of each motor
Have an old one that changes direction when turned off and then back on and has been great as you apply while turning in one direction and the guide tunnels fill on one side but are a bit sparse in the other side so I change the rotation direction and I always get a very even finish and don't have any issues with fish eye or dry spots.
I know that the rod smith with the black plastic chuck has the same type of motor that you can change the rotation direction just a little something to think about if your a tinker or if you just purchase the rod smith dryer if your looking to up grade or new to rod building it is one of those things that makes easier to get a perfect finish on Your rod

The best day to be alive is always tomorrow
drodmkr

Options: ReplyQuote
Re: rod dryer drying tip
Posted by: Mark Talmo (---.dsl.lsan03.sbcglobal.net)
Date: April 24, 2017 11:11PM

Matthew,
I just finished building a three-station rod dryer also. The 9 RPM motors with “stretchy-chucks” from Mud Hole might be from the same manufacturer as yours as these will also reverse by turning them off, then back on again. For the same reasons you mentioned, the reversing ability is an extremely nice feature and am surprised Mud Hole does not boast the fact.
My habitual-over-thinking fuels my habitual- over-building. I built mine as three 4ft sections which nest inside of each other when not in use to save space in the shop. The base and back is constructed of Baltic birch plywood with a hinged, bent, clear polycarbonate cover to eliminate dust. For the colder months (even here in SoCal) a heating element was installed with a small, filtered computer fan to slowly circulate the warm air. At the last minute, I decided to add LED lighting. I would not want a customer to see his rod under the LEDs but it is awesome for discovering even the smallest flaw in the finish.

Mark Talmo
FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!!

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster