I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2018 Expo
Common Cents Info
CCS Database
Int. Custom Rod Symbol
All American Guides
American Tackle
Angler’s Roost
Anglers Rsrc - Fuji
Anglers Workshop
BatsonRainshadowALPS
Bingham Enterprises
Canada Rodbuildersupply
CRB
Cork4Us
CTS Rod Blanks
CTS MAVEN
Custom Fly Grips LLC
Custom Labeling System
DBlue Fishing
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HYDRA
Janns Netcraft
Mickels Custom Rods
Mudhole Custom Tackle
MHX Rod Blanks
Pacific Bay
ProProducts
Reelseatblanks.com
Renzetti Inc.
Rocky Mountain Rod Shop
Rod Components USA
Rodgeeks
RodMaker Magazine
RodMaker Magazine Blog
Schneiders Rod Shop
SeaGuide Corp.
St Croix Rods
Tackleworks
The Rod Room
Trondak U-40
Utmost Enterprises
VisualWRAP/VisualWEAVE
ZipCast

PA rod builders
Posted by: Ken Brown 2 (---.115.230.21.res-cmts.mtp2.ptd.net)
Date: March 10, 2017 02:16PM

From what I have seen on here and searches on the net, it seems like there are very few rod builders in PA. I have noticed a few here and there but not that many. Im located in the Poconos if there are any other PA people here.

Options: ReplyQuote
Re: PA rod builders
Posted by: Roger Templon (---.aoo.pa.atlanticbb.net)
Date: March 10, 2017 06:19PM

I'm a rodbuilder from Altoona !

Rog

Options: ReplyQuote
Re: PA rod builders
Posted by: Lynn Behler (---.97.252.156.res-cmts.leh.ptd.net)
Date: March 10, 2017 06:38PM

Carbon County. (hobby)



Edited 2 time(s). Last edit at 03/10/2017 08:00PM by Lynn Behler.

Options: ReplyQuote
Re: PA rod builders
Posted by: Bruce Tomaselli (---.altnpa.east.verizon.net)
Date: March 10, 2017 07:16PM

I'm a hobby rod builder from Cambria County.

Options: ReplyQuote
Re: PA rod builders
Posted by: Barry Weaver (---.hsd1.pa.comcast.net)
Date: March 10, 2017 08:09PM

my shop is in Elizabethtown,,Lancaster County I am a fulltime builder.

Options: ReplyQuote
Re: PA rod builders
Posted by: Jon Kistler (---.102.221.100.res-cmts.t132.ptd.net)
Date: March 10, 2017 08:46PM

I live in Palmerton, PA

Options: ReplyQuote
Re: PA rod builders
Posted by: David Parsons (---.c3-0.drf-ubr1.atw-drf.pa.cable.rcn.com)
Date: March 11, 2017 09:08AM

I live near the Philadelphia international airport with family in the poconos did a lot of fishing as a teenager up there send me a email.

Options: ReplyQuote
Re: PA rod builders
Posted by: Jeff Shafer (---.c3-0.drf-ubr1.atw-drf.pa.cable.rcn.com)
Date: March 11, 2017 08:07PM

I'm in the Lehigh Valley, have been building since mid 80's.

Options: ReplyQuote
Re: PA rod builders
Posted by: Mike Canavan (---.stny.res.rr.com)
Date: March 11, 2017 09:27PM

Bradford county. Build mostly rods for family and NY Finger Lakes fishermen

Options: ReplyQuote
Re: PA rod builders
Posted by: Ken Brown 2 (---.115.230.21.res-cmts.mtp2.ptd.net)
Date: March 12, 2017 04:15PM

Sounds like most of you are fairly far away from me. I used to live in Emmaus then moved up to Swiftwater.

I have built 2 rods so far, working on a third. I am also re-purposing a store bought rod. I just marbled the grips and i think it came out pretty sweet! Yes..I am a rod building addict now!

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster