SPONSORS
2024 ICRBE EXPO |
Checkerboard cork rings
Posted by:
Jay McKnight
(---.dhcp.aldl.mi.charter.com)
Date: February 12, 2017 04:44PM
I've been asked to build a pair of grips using a few checkerboard trim rings. It's not usually my type of thing, so I really hate to spend the cash on cork cutting jigs and the little saw. Does anyone know of a source for pre-fabbed checkerboard rings? I've seen them in the past, but can't find them now. Re: Checkerboard cork rings
Posted by:
Donald La Mar
(---.lightspeed.lsvlky.sbcglobal.net)
Date: February 12, 2017 05:36PM
Jay
I remember seeing them as well, but cannot for the life of me remember where. If you cannot find a source for rings only, try Custom Fly Grips, LLC. They could most probably build the grips to your specifications. Frankly, cutting and gluing the ring wedges is the easy part. Aligning and gluing the rings up, spot on perfect, is a bit of a pain. Re: Checkerboard cork rings
Posted by:
Michael Maclean
(---.pn.at.cox.net)
Date: February 12, 2017 06:06PM
Are you talking about these? [www.mudhole.com] Re: Checkerboard cork rings
Posted by:
Jay McKnight
(---.dhcp.aldl.mi.charter.com)
Date: February 12, 2017 06:34PM
Michael Maclean Wrote:
------------------------------------------------------- > Are you talking about these? > [www.mudhole.com] > ith-Exotic-Woods-14 Sort of, those are wood, I'm looking for similar ones made of burl cork. Re: Checkerboard cork rings
Posted by:
Phil Erickson
(---.dsl.pltn13.sbcglobal.net)
Date: February 12, 2017 07:35PM
How many do you need? Re: Checkerboard cork rings
Posted by:
Jay McKnight
(---.dhcp.aldl.mi.charter.com)
Date: February 12, 2017 08:01PM
6 of them, looking for burnt with natural ideally. Re: Checkerboard cork rings
Posted by:
Thomas Kaufmann
(107.77.89.---)
Date: February 13, 2017 08:48PM
What about cork 4us Re: Checkerboard cork rings
Posted by:
Bill Sidney
(---.gci.net)
Date: February 17, 2017 05:22PM
if you cut your own an it don't come out the way you like do drop me a note I can help you over the hard parts William Sidney AK Sorry, only registered users may post in this forum.
|