SPONSORS
2024 ICRBE EXPO |
Help with pistol grip
Posted by:
Chuck Blocker
(---.hsd1.fl.comcast.net)
Date: February 07, 2017 02:52PM
I have a friend that broke the tightening mechanism on a favorite rods of his, the part that holds down the front of the reel. Does anyone know where I can but a replacement? Re: Help with pistol grip
Posted by:
Robert A. Guist
(---.dhcp.embarqhsd.net)
Date: February 07, 2017 03:05PM
Hello Chuck.
You might want to check with Jann's Netcraft, I know they sell the whole handles, maybe they can hook you up. Tight Wraps & Tighter Lines. Bob, New Bern, NC. Re: Help with pistol grip
Posted by:
Matthew Pitrowski
(---.lightspeed.milwwi.sbcglobal.net)
Date: February 07, 2017 03:23PM
that is the skip and screw
You might want to check with any reel repair shop near to you or on the net The best day to be alive is always tomorrow !! Think out side the box when all else fails !!! Wi. Re: Help with pistol grip
Posted by:
Spencer Phipps
(172.56.42.---)
Date: February 07, 2017 03:36PM
Schneiders to the left was selling them seperate from the reel seat last I looked, they are all are pretty much the same, no matter the company. Re: Help with pistol grip
Posted by:
Matthew Pitrowski
(---.lightspeed.milwwi.sbcglobal.net)
Date: February 08, 2017 10:47AM
you also could go to a local thrift store or good will and pick up a rod for a couple bucks and cannibalize it for parts and the skip and screw The best day to be alive is always tomorrow !! Think out side the box when all else fails !!! Wi. Re: Help with pistol grip
Posted by:
Norman Miller
(---.lightspeed.jcsnms.sbcglobal.net)
Date: February 08, 2017 08:13PM
I have a few salvaged skips and screws that you can have them. Just e-mail me if you want them.
Norm Sorry, only registered users may post in this forum.
|