I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Forum Question
Posted by: Jon Salter (73.248.94.---)
Date: February 03, 2017 10:50PM

So I am fairly new to this forum so I am a bit unclear about some rules.
I had a post deleted recently regarding an issue I had with a product.
I had no intent to "bash" the product, I was simply sharing an experience with fellow builders.
I have no ill feelings and I expect no issue in getting the problem resolved.
In my opinion both good and bad experiences should be shared.
Thoughts?



Edited 3 time(s). Last edit at 02/03/2017 11:04PM by Jon Salter.

Options: ReplyQuote
Re: Forum Question
Posted by: Chris Tulk (---.dsl.bell.ca)
Date: February 04, 2017 12:51AM

What's your email address?

Thank You,

Chris Tulk

Options: ReplyQuote
Re: Forum Question
Posted by: Robert Hummel (---.lightspeed.dybhfl.sbcglobal.net)
Date: February 04, 2017 01:00PM

Ditto on your e-mail address. Don't feel bad, I've posted things that have been removed also.

Options: ReplyQuote
Re: Forum Question
Posted by: Lynn Behler (---.97.252.156.res-cmts.leh.ptd.net)
Date: February 04, 2017 04:25PM

I feel the same Jon. It's a bit of a disappointment when that happens.

Options: ReplyQuote
Re: Forum Question
Posted by: Tom Kirkman (Moderator)
Date: February 04, 2017 04:57PM

[rodbuilding.org]

.............

Options: ReplyQuote
Re: Forum Question
Posted by: Jon Salter (---.sub-174-200-8.myvzw.com)
Date: February 04, 2017 05:03PM

Thanks Tom..I did read that....I still am unclear what the issue was. Unless it was a YouTube link....but that was to show the issue.

Options: ReplyQuote
Re: Forum Question
Posted by: Tom Kirkman (Moderator)
Date: February 04, 2017 05:08PM

The rules ask that you do link to other sites that feature advertising. Youtube is a bit of an grey area as most builders don't have advertising on their Youtube pages. Most likely the moderator saw it and removed it, per the rules. It's not a big deal, I'm sure you meant no harm.

................

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster