SPONSORS
2024 ICRBE EXPO |
Burnt cork and metal accent questions
Posted by:
mike langevin
(---.sub-70-214-115.myvzw.com)
Date: January 20, 2017 01:30PM
Hi all !
If I sand a burnt cork ring in making a grip will the burnt material come off leaving regular cork underneath? Or is that burnt color all the way through the cork ring? How do I mount a 1 inch metal accent ring between a Eva or cork grip and real seat? Thanks everybody!! Re: Burnt cork and metal accent questions
Posted by:
Tom Kirkman
(Moderator)
Date: January 20, 2017 01:48PM
It's all the way through.
......... Re: Burnt cork and metal accent questions
Posted by:
Matthew Pitrowski
(---.lightspeed.milwwi.sbcglobal.net)
Date: January 20, 2017 03:12PM
How do I mount a 1 inch metal accent ring between a Eva or cork grip and real seat?
on an arbor like the reel seat The best day to be alive is always tomorrow !! Think out side the box when all else fails !!! Wi. Re: Burnt cork and metal accent questions
Posted by:
Spencer Phipps
(172.56.42.---)
Date: January 20, 2017 03:31PM
Mount it on a tenon that is built into the cork or eva grip, the remainder goes into the reelseat. Re: Burnt cork and metal accent questions
Posted by:
mike langevin
(---.nycmny.fios.verizon.net)
Date: January 22, 2017 05:55PM
Thanks all. I will have to trim the end of grips down to the Id of trim ring as the grips I use rarely have tenons. Sorry, only registered users may post in this forum.
|