I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

New Rod Builder
Posted by: Scott Birmingham (---.hsd1.tx.comcast.net)
Date: January 13, 2017 11:32PM

I just wanted to say hello and thank you to all of you for the expert advice on this site. I have read for hours prior to attempting my first rod. Pretty much every question has been covered here. With all of your guidance, we will have our first bass rod completed in the next few days. We started with a kit, but gained enough confidence to build exactly what we want from here on out. This site is indispensable for rod building.

Options: ReplyQuote
Re: New Rod Builder
Posted by: Steve Monroe (---.kya.res.rr.com)
Date: January 13, 2017 11:57PM

Welcome

Options: ReplyQuote
Re: New Rod Builder
Posted by: Mark Talmo (---.dsl.lsan03.sbcglobal.net)
Date: January 14, 2017 01:30AM

Scott,
It is commendable of you to give credit where credit is due. Many on this site in general, the veterans in particular, continually and unselfishly offer assistance to everyone including us newbies, yet are not given the recognition and thanks they deserve often enough.

Mark Talmo
FISHING IS NOT AN ESCAPE FROM LIFE BUT RATHER A DEEPER IMMERSION INTO IT!!! BUILDING YOUR OWN SIMPLY ENHANCES THE EXPERIENCE.

Options: ReplyQuote
Re: New Rod Builder
Posted by: Lynn Behler (---.97.252.156.res-cmts.leh.ptd.net)
Date: January 14, 2017 08:55PM

Welcome Scott, You had me when you wrote "I have read for hours". Good Building

Options: ReplyQuote
Re: New Rod Builder
Posted by: Dennis Danku (---.dyn.optonline.net)
Date: January 15, 2017 01:47PM

Scott, Between 1974 and 1977 all I did was read about building a better rod for Bass fishing. I read Fishing Facts, InFisherman, Bass Master just about anything that had to do with fishing, but I never thought I could build my own rods until one day in 1977.I went to a local bait shop and bought a spool of thread and some rod varnish . I'll never forget that day because while putting guides on an old fly rod tip to become a UL spinning rod, I had the radio on a NY station(WNEW-FM) when it was announced that ELVIS PRESLEY had passed away.
I thought I knew enough to get by with building and doing repairs until 2004 when I found this site. It has helped with a lot of time saving and different ways to do things along with all kinds of materials and products to use. There is a lot of information to be gained here by ever giving like minded people. I know some guys don't like unions but we have a strong one here.

Dennis J. Danku
(Sayreville,NJ)

Options: ReplyQuote
Re: New Rod Builder
Posted by: Scott Birmingham (---.frontierutilities.com)
Date: January 16, 2017 01:48PM

Thank you for the welcome. Is there a newbie area? I don't want to clog up the board with any stupid questions.

Options: ReplyQuote
Re: New Rod Builder
Posted by: David Baylor (---.neo.res.rr.com)
Date: January 17, 2017 07:38AM

Scott, there are no stupid questions. Even a question that turns out having a simple answer is a good question. You'll be amazed at how some of your questions are answered differently by different builders.

I have no doubts that even the veteran builders on this site learn a thing or two from time to time. And those new to building, like you ..... or those still fairly new to building, like myself can learn a ton from the builders on this site.

They're a great bunch of people that are more than willing to share their knowledge.

I love this place !!!

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster