SPONSORS
2024 ICRBE EXPO |
need rod built in southern California
Posted by:
peter gersumky
(---.lightspeed.sndgca.sbcglobal.net)
Date: January 12, 2017 12:14PM
Looking for a rod builder in southern ca , i need a fresh water rod built and some cork turned , i live in San Diego but am open to having it built in areas surrounding . i would like to be able to meet the builder and personally go over the rod . i have all the components and of course the blank . thanks ! Re: need rod built in southern California
Posted by:
Tom Kirkman
(Moderator)
Date: January 12, 2017 01:01PM
www.tackleworks.org might be one place to look.
............ Re: need rod built in southern California
Posted by:
peter gersumky
(---.lightspeed.sndgca.sbcglobal.net)
Date: January 12, 2017 01:14PM
i tried contacting Don Cambell with no luck , seems 90 % of the rod builders in so.cal build mostly saltwater rods and use eva and do not turn cork . Re: need rod built in southern California
Posted by:
Mark Talmo
(---.dsl.lsan03.sbcglobal.net)
Date: January 12, 2017 02:21PM
Hello Peter,
My name is Mark Talmo and live 2 hours north near the intersection of I10 and I605. Admittedly, I have been building rods for less than a year but have learn immensely form research and even more from the qualified veterans within this site. At the risk of sounding boastful, I am confident my rookie abilities would surprise many of those veterans. While certainly enjoying the exhausting thrill of fighting a tuna or Dorado, my passion for the past 40 years is fishing the Sierra wilderness for Golden Trout, point being that I have built more fresh than salt water rods. If my rookie status does not scare you, email me and we can go from there. I can guarantee no one is more conscious and critical of detail. Re: need rod built in southern California
Posted by:
peter gersumky
(---.lightspeed.sndgca.sbcglobal.net)
Date: January 12, 2017 02:33PM
just found a rod builder , thanks .... Re: need rod built in southern California
Posted by:
Donald R Campbell
(---.socal.res.rr.com)
Date: January 14, 2017 09:36AM
peter gersumky Wrote:
------------------------------------------------------- > i tried contacting Don Cambell with no luck , > seems 90 % of the rod builders in so.cal build > mostly saltwater rods and use eva and do not turn > cork . Peter, I apologize for missing your call as I did not have my cell phone turned on that day. It was nice talking with you yesterday and 'am please you were able to locate a rod builder to fill your needs. Without a doubt, I would have loved to build a rod for you; however, the Oral Surgeon was busy emptying my wallet when you called. Don Campbell don@sensorfishingrods.com Edited 1 time(s). Last edit at 01/14/2017 09:36AM by Donald R Campbell. Sorry, only registered users may post in this forum.
|