I
nternet gathering place for custom rod builders
  • Custom Rod Builders - This message board is provided for your use by the sponsors listed on the left side of the page. Feel free to post any question, answers or topics related in any way to custom building. When purchasing products please remember those who sponsor this board.

  • Manufacturers and Vendors - Only board sponsors are permitted and encouraged to promote and advertise products on the board. You may become a sponsor for a nominal fee. It is the sponsor fees that pay for this message board.

  • Rules - Rod building is a decent and rewarding craft. Those who participate in it are assumed to be civilized individuals who are kind and considerate in their dealings with others. Please respond to others in the same fashion in which you would like to be responded to. Registration IS NOW required in order to post. You must include your actual First and Last name and a correct email address when registering or posting. Posts which are inflammatory, insulting, or that fail to include a proper name and email address will be removed and the persons responsible will be barred from further participation.

    Registration is now required in order to post. You must include your actual First and Last name and a correct email address when registering or posting.
SPONSORS

2024 ICRBE EXPO
CCS Database
Custom Rod Symbol
Common Cents Info
American Grips Piscari
American Tackle
Anglers Rsrc - Fuji
BackCreek Custom Rods
BatsonRainshadowALPS
CRB
Cork4Us
HNL Rod Blanks–CTS
Custom Fly Grips LLC
Decal Connection
Flex Coat Co.
Get Bit Outdoors
HFF Custom Rods
HYDRA
Janns Netcraft
Mudhole Custom Tackle
MHX Rod Blanks
North Fork Composites
Palmarius Rods
REC Components
RodBuilders Warehouse
RodHouse France
RodMaker Magazine
Schneiders Rod Shop
SeaGuide Corp.
Stryker Rods & Blanks
TackleZoom
The Rod Room
The FlySpoke Shop
USAmadefactory.com
Utmost Enterprises
VooDoo Rods

Pacbay minima reel seat measurements needed
Posted by: Darren keats (---.154.93.209.dyn.plus.net)
Date: December 18, 2016 05:41AM

Hi chaps,these are not available in England and no measurements are given on pacbay. Can some kind person please measure the od of where the seat will meet the grip. Need the trigger grip and spinning seat version measurements Many thanks
[www.anglersworkshop.com]

Options: ReplyQuote
Re: Pacbay minima reel seat measurements needed
Posted by: Spencer Phipps (---.hsd1.or.comcast.net)
Date: December 18, 2016 10:32AM

They are sized with different IDs just like an exposed blank reel seat. The OD is also the same for both the spinning and casting, the spinning seat just has no trigger, about 1.1 inches if I remember right. The same as any 16, 17, and also 18 mm casting trigger reel seat I believe.



Edited 3 time(s). Last edit at 12/18/2016 11:43AM by Spencer Phipps.

Options: ReplyQuote
Re: Pacbay minima reel seat measurements needed
Posted by: Darren keats (---.154.93.209.dyn.plus.net)
Date: December 18, 2016 01:44PM

Hi spencer,the ID does not concern me just an accurate measurement of the od where it will meet the cork/EVA etc. I am developing a new casting grip and need the precice measurement. Fuji has all the dimensions for their seats but pacbay and alps give nothing.

Options: ReplyQuote
Re: Pacbay minima reel seat measurements needed
Posted by: Lynn Behler (---.97.252.156.res-cmts.leh.ptd.net)
Date: December 18, 2016 02:57PM

Darren, Minima size 16 casting measures 26.3mm. outside, where it butts against rear grip.

Options: ReplyQuote
Re: Pacbay minima reel seat measurements needed
Posted by: Donald R Campbell (---.socal.res.rr.com)
Date: December 18, 2016 04:06PM

Darren,

I just mic'ed a 16 mm PacBay Minima split spinning reel seat and the O.D. measured 26.4 mm.

Don Campbell
don@sensorfishingrods.com

Options: ReplyQuote
Re: Pacbay minima reel seat measurements needed
Posted by: Norman Miller (---.lightspeed.jcsnms.sbcglobal.net)
Date: December 18, 2016 04:26PM

Both the spin and trigger seats have the same OD. The inlet size on both about 22 mm.
Norm

Options: ReplyQuote
Re: Pacbay minima reel seat measurements needed
Posted by: Darren keats (---.154.93.209.dyn.plus.net)
Date: December 18, 2016 05:30PM

Many thanks for the measurements guys. When I launch my new products I will show you on here. Cheers for now,darren

Options: ReplyQuote


Sorry, only registered users may post in this forum.
Webmaster