SPONSORS
2024 ICRBE EXPO |
flex coat second coat
Posted by:
robert taylor
(---.direcway.com)
Date: October 08, 2016 04:47PM
How long do you wait to apply a second coat of flex coat. Re: flex coat second coat
Posted by:
Michael Danek
(---.adr02.mskg.mi.frontiernet.net)
Date: October 08, 2016 06:12PM
I find it not that critical, but one of the reasons I need a second coat is to cut off bumps, sand off bubbles/dust. So I wait until it is solid, clean it up, then add the second coat. I think you can do it any time after the finish is somewhat cured, it is not necessary for it to be fully hard. Re: flex coat second coat
Posted by:
Norman Miller
(---.lightspeed.jcsnms.sbcglobal.net)
Date: October 08, 2016 06:16PM
Any time after it has et up and is no longer tacky.
Norm Re: flex coat second coat
Posted by:
Spencer Phipps
(---.hsd1.or.comcast.net)
Date: October 08, 2016 07:17PM
You want that second coat to go on in the first 24 hours, let it set to long and the coats won't bond to the each other as well as they should. Re: flex coat second coat
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: October 11, 2016 10:26AM
overnight works fine Bill - willierods.com Sorry, only registered users may post in this forum.
|