SPONSORS
2024 ICRBE EXPO |
Cork and EVA handle
Posted by:
John Wright
(---.om.om.cox.net)
Date: August 28, 2016 11:28AM
Has anyone made handles from cork and eva foam? I think it should work OK, but was wondering what glue to use and how to turn with the different densities. Re: Cork and EVA handle
Posted by:
Spencer Phipps
(---.hsd1.or.comcast.net)
Date: August 28, 2016 03:44PM
Yes I have, I use Rod Bond epoxy, I turn thing close to the same size individually, than after gluing, finish up using a wood block with sandpaper on it to insure the cork to EVA joints are sanded equally. Re: Cork and EVA handle
Posted by:
John Wright
(---.om.om.cox.net)
Date: August 28, 2016 05:18PM
Spencer,
Thank you. Re: Cork and EVA handle
Posted by:
John E Powell
(---.dynamic.wnyric.org)
Date: August 30, 2016 04:09PM
Comments deleted Edited 1 time(s). Last edit at 09/20/2016 04:09PM by John E Powell. Sorry, only registered users may post in this forum.
|