SPONSORS
2024 ICRBE EXPO |
Need help identifying guides
Posted by:
Randy Hively
(---.dr01.chtn.wv.frontiernet.net)
Date: July 27, 2016 12:08PM
I have an Abu Garcia Veritas spinning rod that needs one guide replaced. Do any of you happen to know what guides are used on this rod? The rod belongs to a friend, just want to replace the one that is missing, if I can match it. Thanks. Re: Need help identifying guides
Posted by:
Michael Maclean
(---.sub-70-209-55.myvzw.com)
Date: July 27, 2016 01:25PM
Have you tried calling or emailing Abu Garcia? Re: Need help identifying guides
Posted by:
Ross Pearson
(---.dlth.qwest.net)
Date: July 27, 2016 02:43PM
I had a similar situation in the recent past. I called the company and was told their guides were made specifically for them and not available to the public. So, I matched the guide needing replacement as close as possible by its looks. Edited 1 time(s). Last edit at 07/29/2016 11:03AM by Ross W Pearson. Re: Need help identifying guides
Posted by:
Lynn Behler
(---.97.252.156.res-cmts.leh.ptd.net)
Date: July 27, 2016 03:29PM
Randy, Ross is correct. I have one on the dryer right now. A family friend broke one on a recent trip to Canada and I quick fixed it with thread and nail polish. When we got back I got the rod to properly repair it and he requested I replace them all. Using ALPS xbytlg models which are pretty close to the originals. I was able to start with a #20 stripper instead of the the original #25 and the first 3 from the tip back are #6 Alps fly guides. The set I removed weighs 7 grams, the new set weighs 4.22 grams. (7 guides). I can recommend changing them all because they seem to break on a regular basis. If careful you can unwind the old thread just far enough to remove the guide thus keeping those small silver single thread trim bands intact and wrap from there up over the new feet. Worked a treat for me! Rod is rated for 6-10 lb. line but is used only with 8lb. Re: Need help identifying guides
Posted by:
Randy Hively
(---.dr01.chtn.wv.frontiernet.net)
Date: July 27, 2016 03:54PM
Thanks for the responses. Looks like I will replace all of them. Re: Need help identifying guides
Posted by:
Boreas Yao
(60.217.64.---)
Date: July 27, 2016 10:37PM
It costs too much,if replace all guides.The guides of Veritas is titanium material with zicronium insert, more expensive. And there are 6+1 , or 7+1 guides on the spinning rod. Re: Need help identifying guides
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: July 28, 2016 11:36AM
I am with Ross Unless the friend will pay for all the guides and replacement ?? Bill - willierods.com Re: Need help identifying guides
Posted by:
Lynn Behler
(---.97.252.156.res-cmts.leh.ptd.net)
Date: July 28, 2016 04:09PM
I don't claim to know what the original guides were. I do know they break a lot and the total for the replacements was $10.20 before shipping. These rods cost $100.00 new. I suspect the original guides are titanium in color only. Re: Need help identifying guides
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: July 28, 2016 08:02PM
Just make SURE you get paid Or why do it ??? Bill - willierods.com Re: Need help identifying guides
Posted by:
Lynn Behler
(---.97.252.156.res-cmts.leh.ptd.net)
Date: July 28, 2016 09:24PM
I sometimes do things just because I like doing them! Re: Need help identifying guides
Posted by:
Tom Wewerka
(---.bltmmd.fios.verizon.net)
Date: July 28, 2016 11:14PM
I too called ABU Garcia and was told there are no parts for their rods available in the US. As was said above tthe good news for rod builders is that the guides on them break easily and often. On the Veritas a Fuji CLNAG on the double foot or CLAG in the fly guides is a very close match and a far better product. I have done a few of total replacement guides but when you figure that the rod can be bought on sale for $79 how much are they willing to pay is the problem. Edited 1 time(s). Last edit at 07/28/2016 11:16PM by Tom Wewerka. Re: Need help identifying guides
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: July 29, 2016 10:49AM
So do I Lynn I just got tired of giving things away Bill - willierods.com Re: Need help identifying guides
Posted by:
Lynn Behler
(---.97.252.156.res-cmts.leh.ptd.net)
Date: July 29, 2016 08:39PM
I hear ya! Bill Re: Need help identifying guides
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: July 30, 2016 10:15AM
Like is said It is the Economy stupid LOL Bill - willierods.com Sorry, only registered users may post in this forum.
|