SPONSORS
2024 ICRBE EXPO |
KW stripper guide size
Posted by:
Frank Summers
(---.sub-70-209-208.myvzw.com)
Date: June 24, 2016 05:12PM
Looking to build a saltwater spinning rod using Fuji KW guides and would like suggestions for the stripper guide size. The rod will be a 7' extra fast, 20-40 lb line rating. reel will be an Okuma Raw II 80.
I cannot seem to get the Fuji GPS to show the data on my computer. Thank You. Edited 1 time(s). Last edit at 06/24/2016 05:13PM by Frank Summers. Re: KW stripper guide size
Posted by:
Michael Danek
(---.adr02.mskg.mi.frontiernet.net)
Date: June 24, 2016 06:16PM
The biggest factor in your decision is what line type and test do you plan to use. Until that is decided, there is no answer. Re: KW stripper guide size
Posted by:
Buzz Butters
(---.dhcp.fdul.wi.charter.com)
Date: June 25, 2016 06:34AM
Frank once you figure out line type (mono or braid) and line size, then take the diameter of the outer edge of the reel spool, divide that in half and that will be the ring size for the stripper guide to start with. Of course test casting is part of the process but this is a very good way to start.
Example 42mm diameter of reel spool / 2 = 21mm or a 25mm ring size stripping guide. \Buzz Re: KW stripper guide size
Posted by:
Michael Danek
(---.adr02.mskg.mi.frontiernet.net)
Date: June 25, 2016 08:29AM
With the tall KW guides and lighter braid sizes you will not need rings of half the spool diameter. Go to the Anglers REsource site, left column has the link, and hit on the catalog button. Go to page 13 and work on from there. Get the info right from Fuji. Re: KW stripper guide size
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: June 25, 2016 09:59AM
Check here there are several good articals on setting them up
[www.rodbuilding.org] Bill - willierods.com Re: KW stripper guide size
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: June 25, 2016 10:29AM
With that size line, I would be using a size 30 tall stripper. Better to go a bit bigger than a bit smaller on the stripper to avoid long time line issues and slap from using a guide that is too small.
If in doubt, obtain a tall size 30, a size 25, and a size 20 stripper guide. Then, go ahead and wrap up the rest of the guides. Then, take each of the different sized strippers and use the heaviest line that you ever plan to use on the rod, and test wrap each of the strippers on the rod and test cast. I suggest that you start with the smallest and if you are happy with the smallest, you won't have to rewrap. But if you are using heavy mono, I would imagine that you will be wanting to use the size 30. The size of the stripper guide has very little to do with the feel and handling of the rod, since the stripper is so close to the reel seat. Use the size guide that works best for the reel, line and type work that you are going to use for the rod. Go to large - no big deal. Go to small, and every time you cast, you will be irritated with the problems that you have with the line. Good luck Re: KW stripper guide size
Posted by:
Michael Danek
(---.adr02.mskg.mi.frontiernet.net)
Date: June 25, 2016 11:28AM
With all due respect, go to the Fuji catalog and let them guide you. Then, with your facts and priorities, you can make the best decision. Re: KW stripper guide size
Posted by:
Norman Miller
(---.lightspeed.jcsnms.sbcglobal.net)
Date: June 25, 2016 01:08PM
The Okuma Raw II 80 is a very large and heavy reel, in my opinion you will need to go larger rather than smaller with the stripper. It is not so much the ring size that is important but rather the height of the guide. The KW guides are higher than the more traditional double foot guide types. The size 30 KW is as high as a size 40 SV, MN, or N style guides. This increased height allows you to go one ring size smaller. Are you sure you need such a large reel on a 7' rod?
Norm Re: KW stripper guide size
Posted by:
Frank Summers
(---.static.rvsd.ca.charter.com)
Date: June 25, 2016 04:56PM
Plan on using long 25# mono topshot and 50# braid backing. Since it is such a large reel I may go to a 7 1/2 to 8' rod.
Thank you for the help. Edited 1 time(s). Last edit at 06/25/2016 05:04PM by Frank Summers. Re: KW stripper guide size
Posted by:
Spencer Phipps
(---.hsd1.or.comcast.net)
Date: June 26, 2016 12:31AM
I wouldn't worry about the size of the reel, if the blank you mentioned is going to give you the rod you need than build it. Many short casting rods have big casting reels on them with similar weights, just because it's a spinning reel makes no difference to my way of thinking. There is more important reasons for using certain length rods, type of boat they're used on, power necessary to exert on the fish, presentation limitations, hook setting capability, etc. Reel size is IMO below all those. Re: KW stripper guide size
Posted by:
Mark Gwynne
(101.162.2.---)
Date: June 26, 2016 02:40AM
Slightly off topic but just curious about the reel selection compared to the line class. Do you need a lot of line capacity due to the depth you will be fishing?
Also I'm interested in the choice of such a light top shot compared to the main line. It's half the strength of the braid and given braid typically breaks well above its rating, it's even more of a difference. Cheers. Re: KW stripper guide size
Posted by:
roger wilson
(---.hsd1.mn.comcast.net)
Date: June 26, 2016 12:38PM
Mark,
Many of the fishermen who fish Muskies here in the upper midwest often use 50-100 lb braid as their main line along with their leaders. They use the heavier line for its casting ability with the heavy lures that they throw so many times a day in pursuit of their fish. Be safe Re: KW stripper guide size
Posted by:
Frank Summers
(---.static.rvsd.ca.charter.com)
Date: June 26, 2016 06:33PM
Thank-you for everyone's input. A lot of things to consider and reconsider but I think l' be been pointed in the right direction. Re: KW stripper guide size
Posted by:
Mark Gwynne
(101.162.2.---)
Date: June 27, 2016 02:59AM
Thanks Roger. That's a very interesting approach. I typically use a very similar size leader or a little heavier. It goes to show the 'horses for courses' variety we see in the fishing circles around the globe.
Cheers. Sorry, only registered users may post in this forum.
|