SPONSORS
2024 ICRBE EXPO |
Can I make a Fuji ECSM hidden threaded?
Posted by:
Cameron Johnson
(---.triad.res.rr.com)
Date: June 24, 2016 12:12AM
Hey guys so like topic says I am wanting to make the ECSM have hidden threads. Is there something I can buy to do this? thanks! Re: Can I make a Fuji ECSM hidden threaded?
Posted by:
Norman Miller
(---.lightspeed.jcsnms.sbcglobal.net)
Date: June 24, 2016 01:15AM
Yes you can do it. All of the Fuji hidden tread hoods will fit the ECSM seat, the SK2 hidden tread hood, fits perfectly. Just make sure you order the right size, size 16 hood for the 16 seat, and size 17 for the size 17 seat. In fact these hoods will fit all the appropriately sized Fuji seats, and most of the seats from other brands.
Norm Re: Can I make a Fuji ECSM hidden threaded?
Posted by:
Cameron Johnson
(---.sub-70-199-227.myvzw.com)
Date: June 24, 2016 09:11AM
sounds good thanks! Re: Can I make a Fuji ECSM hidden threaded?
Posted by:
Jim Ising
(---.dyn.centurytel.net)
Date: June 24, 2016 09:34AM
You can also use the Perfect Fit hidden thread assembly we recently introduced. A carbon tube cover for the thread in 6 colors, with winding checks and trim rings to match. Re: Can I make a Fuji ECSM hidden threaded?
Posted by:
Cameron Johnson
(---.triad.res.rr.com)
Date: June 24, 2016 08:30PM
Jim Ising Wrote:
------------------------------------------------------- > You can also use the Perfect Fit hidden thread > assembly we recently introduced. A carbon tube > cover for the thread in 6 colors, with winding > checks and trim rings to match. Wait sorry that is what I was wanting to do, but does the carbon tube cover thread on to the reel seat? I thought I would need a hood that has threads and then a cover attached like the SK2 hidden thread hood to glue the Perfect Fit carbon tube to. Re: Can I make a Fuji ECSM hidden threaded?
Posted by:
Norman Miller
(---.lightspeed.jcsnms.sbcglobal.net)
Date: June 24, 2016 08:59PM
Cameron, Jim is just suggesting that you can use the carbon fiber tube on the SK2 hidden thread hood instead of something else (i.e. cork Eva or Winn grip). The Carbon fiber tube and the perfect fit winding check and trim ring fits perfectly on the SK2 hidden thread hood.
Norm Re: Can I make a Fuji ECSM hidden threaded?
Posted by:
Cameron Johnson
(---.triad.res.rr.com)
Date: June 25, 2016 12:41AM
Oh ok gotchya sorry for the confusion! Thanks thats what I intended to do! Re: Can I make a Fuji ECSM hidden threaded?
Posted by:
Jim Ising
(---.dyn.centurytel.net)
Date: June 27, 2016 10:24AM
I have a new video ready to go that explores the KDPS and its versatility in covering all sorts of reel seat threads. Might be a good time to go ahead and release it. It's about 20 minutes long - a detailed presentation. Re: Can I make a Fuji ECSM hidden threaded?
Posted by:
Terry Fude
(---.dhcp.fdul.wi.charter.com)
Date: June 27, 2016 09:40PM
where will you be posting the video, i would be very interested in watching it Re: Can I make a Fuji ECSM hidden threaded?
Posted by:
Cameron Johnson
(---.triad.res.rr.com)
Date: June 28, 2016 10:28PM
That would be great! I would love to see that Re: Can I make a Fuji ECSM hidden threaded?
Posted by:
Denham Bruce
(---)
Date: December 20, 2020 08:26PM
SK2 does in fact not work with the ECS reel seat. Doesnt tighten enough to keep the reel snug. Just found that out the hard way! Sorry, only registered users may post in this forum.
|