SPONSORS
2024 ICRBE EXPO |
quick question on marbling
Posted by:
Jose Sanchez
(---.mia.fl.atlanticbb.net)
Date: June 13, 2016 01:28AM
so im building a new rod for me and i would like to try out my first marble so im testing this on a blank i wont use anymore, im starting with black then ill try more colors but when i was applying the black marble i notice that when the light was too bright (flashlight) the black didnt seem like black anymore and more towards brownish color is it something i did wrong here?? i was mixing 3ccs with th crb marbling pigments on a lite build epoxy Re: quick question on marbling
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: June 13, 2016 09:30AM
What does it look like in the sunlight The only true light IMHO Bill - willierods.com Re: quick question on marbling
Posted by:
Jose Sanchez
(---.mia.fl.atlanticbb.net)
Date: June 13, 2016 10:00AM
it does not look like a dark black looks more like a light black it is an obvious color change Re: quick question on marbling
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: June 13, 2016 02:31PM
If over a blank I wonder if it could be the blank color showing though
If so maybe paint the area with black paint and then marble it Bill - willierods.com Edited 1 time(s). Last edit at 06/13/2016 02:32PM by bill boettcher. Re: quick question on marbling
Posted by:
Jose Sanchez
(---.mia.fl.atlanticbb.net)
Date: June 13, 2016 02:34PM
the blank color is black Re: quick question on marbling
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: June 13, 2016 02:43PM
Try more pigment Bill - willierods.com Re: quick question on marbling
Posted by:
Jose Sanchez
(---.mia.fl.atlanticbb.net)
Date: June 13, 2016 02:45PM
how much more for a 3cc mix i tried this morning and the epoxy was like a thick sauce Re: quick question on marbling
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: June 13, 2016 04:41PM
Then it has to be the product I don't know what else to say Try a couple different ones Unless some one here knows which is the best - and Black Bill - willierods.com Re: quick question on marbling
Posted by:
Jose Sanchez
(---.mia.fl.atlanticbb.net)
Date: June 13, 2016 04:42PM
which brand or product would you recommend me Re: quick question on marbling
Posted by:
Jose Sanchez
(---.mia.fl.atlanticbb.net)
Date: June 13, 2016 06:33PM
i added more pigment to the epoxy and after 5 hours the epoxy its not even tacky still very liquidy it was a lite build epoxy Re: quick question on marbling
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: June 13, 2016 06:52PM Re: quick question on marbling
Posted by:
Chris Herrera
(---.sub-70-199-134.myvzw.com)
Date: June 15, 2016 07:42PM
Jose,
For your next experiment, you might want to try the Pearl ex pigments. They are a dry pigment, with a slight metallic look, and they don't change the chemical balance of the epoxy. Take care, Chris Sorry, only registered users may post in this forum.
|