SPONSORS
2024 ICRBE EXPO |
How many coats of epoxy are folks using for roller guides?
Posted by:
Dave Altrich
(---.hsd1.ma.comcast.net)
Date: May 30, 2016 06:27PM
How many coats of epoxy are folks doing for roller guides? Re: How many coats of epoxy are folks using for roller guides?
Posted by:
Tom Kirkman
(Moderator)
Date: May 30, 2016 07:46PM
On very heavy saltwater rods I typically use 2 applications. It is primarily a protection against rubbing, abrasion, scrapes, etc.
......................... Re: How many coats of epoxy are folks using for roller guides?
Posted by:
Michael Maclean
(---.knology.net)
Date: May 30, 2016 07:53PM
I use two or three coats of a high build thread finish Edited 1 time(s). Last edit at 05/31/2016 11:50AM by Michael Maclean. Re: How many coats of epoxy are folks using for roller guides?
Posted by:
Ken Preston
(---.opera-mini.net)
Date: May 31, 2016 08:15AM
I find 2 is sufficient Re: How many coats of epoxy are folks using for roller guides?
Posted by:
Joe Willsen
(---.isp.broadviewnet.net)
Date: May 31, 2016 09:39AM
I do an underwrap.....2 overwraps and 2 coats epoxy. Re: How many coats of epoxy are folks using for roller guides?
Posted by:
Robert Moody
(---.phlapa.fios.verizon.net)
Date: June 04, 2016 11:52PM
tHE MOST IMPORTANT THING OF WRAPPING LARGE GUIDES LIKE THESE IS THE AMOUNT OF THREADS AND OVERWRAPS AND UNDER WRAPS. uSE ENOUGH cp TO PENETRATE ALL WRAPS, TWO COATS OF HIGH BUILD SHOULD FINISH IT OFF. Sorry, only registered users may post in this forum.
|