SPONSORS
2024 ICRBE EXPO |
KW casting
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: May 21, 2016 09:49AM
Hi guys
I was wondering if the KW casting guides will work on a Calstar Grafighter for 40 - 80 rating The guy was talking tuna but showed me picts of 25 - 30 LB strippers Will they hold up Need a 30 for line height off the guys LARGE hands Baseball mitts Guides on top Bill - willierods.com Edited 1 time(s). Last edit at 05/21/2016 09:51AM by bill boettcher. Re: KW casting
Posted by:
Donald R Campbell
(---.socal.res.rr.com)
Date: May 21, 2016 09:59AM
Bill,
Send Jim Ising an email at Anglers Resource. He will give you his honest opinion. jising@anglersresource.net PS: Jim I hope you're not mad I posted your email address. Don Campbell don@sensorfishingrods.com Edited 1 time(s). Last edit at 05/21/2016 10:00AM by Donald R Campbell. Re: KW casting
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: May 21, 2016 10:03AM
Will do Don I am not crazy with the frames
Message sent Now just wait Bill - willierods.com Edited 1 time(s). Last edit at 05/21/2016 10:46AM by bill boettcher. Re: KW casting
Posted by:
Mark Gwynne
(---.lnse2.woo.bigpond.net.au)
Date: May 21, 2016 02:07PM
They should but for the height issue you could use the LCSG style to get even better height on the size 20 compared to the K size 30.
After that you can start using the MN frames if you prefer. I've done this on some parabolic rods to keep the line off the foregrip and anglers fingers. Re: KW casting
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: May 21, 2016 02:32PM
Mark
I was checking that one out on fuji's height chart I was thinking that exact thing Wonderful how brilliant minds think the same In fact I ordered that and a 30 in the MN just to try But think the LC will work if the owner wants It has turbos on and he does not like them Thanks for the input guys Bill - willierods.com Edited 1 time(s). Last edit at 05/21/2016 02:35PM by bill boettcher. Re: KW casting
Posted by:
Mark Gwynne
(---.lnse2.woo.bigpond.net.au)
Date: May 21, 2016 06:17PM
Anytime Bill.
My brother didn't like the LC guide for his rod or the K so he had to buy the size 40 MN to get the height. I doubt the 30MN will be sufficient but time will tell. The LC is a 'different' looking guide but I feel it's the best fit for clearance purposes of this type of build. I guess it comes down to a form over function choice for the angler who ends up with the rod. My brothers rod ended up looking good but he did have to step down slowly I'm guide frames as well so had a lot more weight on the blank. Let us know what you end up going with. Re: KW casting
Posted by:
bill boettcher
(---.dyn.optonline.net)
Date: May 21, 2016 06:53PM
I was thinking of the 40 but god that is a LARGE ring And the fuji site measures to the top of the frame so a large ring will Depending on the frame bring the ring bottom of the ring to almost the same place as the guides on there
The LC gave about 1/4" more height with the 20 wide feet but I can turn it around And it fits the space Guides are going where the old guides were The RV guides would be right on -- but not the price and ring size frame and ring material If the guy wanted or liked a spiral wrap he would not have to worry about his line hitting his thumb The frames on the KW cast guides look like the y would Collapse if under too much pressure ???? I may be better with the LC as a butt I'll take to the owner tomorrow Thanks for the help guys Bill - willierods.com Sorry, only registered users may post in this forum.
|