SPONSORS
2024 ICRBE EXPO |
guide layout
Posted by:
curtis drumm
(---.hsd1.md.comcast.net)
Date: February 05, 2016 08:09PM
I have two mhx ssp903 rods I bought on a whim super price mounts back, finaly decided to build them\
into trout trolling rods, I would like to spirole wrap these. I cant find a sajested guide layout for a spirol. S-Glass MHX SSP903, 7' 6" 6-12 lb. Any input would be appreciated on a starting point layout. Thanke you as always Curt Drumm Re: guide layout
Posted by:
Jay Dubay
(---.try.wideopenwest.com)
Date: February 06, 2016 11:34AM
I would call mudhole or MHX if you can't sort it out. Jaa Re: guide layout
Posted by:
Tom Kirkman
(Moderator)
Date: February 06, 2016 12:37PM
At some point you'll need to learn how to figure out guide spacing rather than relying on suggested spacings or factory lay-outs. There are several good guide lay out articles in the online library here.
............... Re: guide layout
Posted by:
curtis drumm
(---.hsd1.md.comcast.net)
Date: February 06, 2016 07:50PM
I have until reacently I have only built fly rods, my first was 1962 I was 9 my dad tought me. my first fly I tied when I was 5.
sorry your right I do need to learn it in the maner that you sajest it is truly the right way , I gess im getting lazy in my upper years. Curt Sorry, only registered users may post in this forum.
|