What is a Vibronics spiral wrap?

Contact Steve Gardner of Vibronics Custom Rods. MH

If I remember correctly its a very slow spiral technique.



Edited 1 time(s). Last edit at 02/06/2016 06:39AM by Mihalyfalvi Gabriel.

There was an article on Steve's Vibronics rods in the Volume 10 #4 issue of RodMaker. It had to do with a host of things Steve does to his rods, not simply a guide system. In fact I'm not sure there is any special guide system involved, although I know that where applicable Steve uses micro guides on his casting rods. If he's using a certain type spiral system I'm sure he'll weigh in here.

................

Simple
Put the guides on as a spinning rod Glue the top on Bring the first three up Run line Static test And let the line tell you where the guides should be Keep the line at the bottom of the guides on the three Under pressure
Test cast If needed put a bumper on where the line touches the blank

Then you can call it anything you want

No offense Steve LOL

Bill - willierods.com



Edited 1 time(s). Last edit at 02/05/2016 05:28PM by bill boettcher.

Robert;
Have switched to a new computer and an having trouble getting me email set up. give me a few days then send an email and I will send you copy of how to lay it out.

Thank you Steve see you at the show...........